Instruction Manual

25
Troubles Possible Cause Action
The atmosphere is too dry and
static electricity affects.
The BC-10 is not grounded and
affected by static electricity.
Turn off the Power Switch. Wait
seven seconds and turn the
power back on. This procedure
resets the microcomputer.
Try a humidifier to make the
atmosphere more humid than
50%.
Make sure the machine is
grounded.
The Onboard Microcomputer
has been affected by an
electromagnetic noise.
12. With the cutting
mode set to "double
cut," cut fragments
go forward and
cause fouling.
13. The BC-10 does
not respond to
command inputs.*
*1, 2, 3, 13: If all of the items in each section have been checked and the problems are
still unresolved, the BC-10 needs to be repaired.
If problems continue after checking all the items above, call for service.