CARPORT MODEL# 455006-32 GREY INSTALLATION MANUAL DO NOT DESTROY THE BOXES UNTIL COMPLETELY ASSEMBLED PLEASE VERIFY THE CONTENT OF EACH BOX AGAINST THE LIST OF PARTS Three adults required for assembly Dimensions: Overall: 16.5ft x 11.83ft x 7.75ft (503cm x 361cm x 236cm) Base: 14.83ft x 11.67ft (451cm x 355cm) Interior: 10.75ft x 6.33ft to 6.92ft clearance (328cm wide x 193 to 211cm) Tools required (not provided): 6ft (1.
11.83ft x 16.5ft / 3.61m x 5.03m Carport Instruction Manual DO NOT DESTROY THE BOXES UNTIL COMPLETELY ASSEMBLED PLEASE VERIFY THE CONTENT OF EACH BOX AGAINST THE LIST OF PARTS IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY Consult with your local governing authority / local municipal codes regarding installation of temporary structures before purchase or assembly. Some jurisdictions may require permits for, or otherwise regulate, installation and use.
(11-741-32) LEG POST A 3 6 (11-757-32) FLOOR BRACKET B 3 12 (11-755-32) LEFT LEG BRACKET C 3 3 2 1 2 2 3 2 2 3 2 (11-751-32) SIDE MID BEAM L 2 2 2 (11-750-32) SIDE BEAM L-1 2 4 2 (11-761-32) SIDE BEAM PLATE L-2 3 4 6 (11-745-32) END RAFTER N 3 (packed inside leg) 6 (11-748-32) GUTTER JUNCTION E 2 2 (11-746-32) RIGHT GUTTER E-1 2 2 (13-042-32) GUTTER END PLATE F-2 (11-749-32) TRUSS JUNCTION H 3 3 3 QTY 3 6 (13-041-32) GUTTER END PLATE F-1 (11-742-32) RIGHT ROOF
(11-744-32) MAIN RAFTER O 3 (11-767-32) ROOF PANEL P 69” X 28” 1 (11-768-32) BOLT M 3 (11-777-32) WASHER Q-1 3 (11-783-32) BOLT S 3 3 3 M6x16mm (11-774-32) WASHER X-1 3 M6 (14-044-32) BOLT X-2 (11-778-32) SCREW Y 3 (11-765-32) WRENCH Z 3 1 (11-771-32) BOLT Aa 3 56 +3 (11-772-32) NUT Aa-1 3 (11-776-32) LOCK WASHER Aa-2 3 142 +5 72 +4 (11-784-32) WASHER S-1 3 (11-785-32) ACORN NUT S-2 3 M10 12 +1 spare 24 +1 spare 3 M10*25mm 24 +2 spare 3 M8 12 +1 spare M10 M8*100mm
STEP 01A: (Pieces: A x6, B x12, C x6, D x6) (Hardware: T x24, Q-1 x48, W x24 for 6 legs total) x6 STEP 01B: (Pieces: E x2, E-1 x2, E-2 x2, F-1 x2, F-2 x2, silicone for sealing (not supplied) ) (Hardware: X x24, X-1 x24, M-1 x24 for 2 gutters total) SILICONE 455006-32.ACAY Carport.1211-18.GP.ENG.
STEP 01C: (Pieces: H x6, H-1 x3, H-2 x3) (Hardware: S x12, S-1 x24, S-2 x12 for 3 sets of braces total) x3 STEP 01D: (Pieces: I x1, I-1 x2, I-2 x2, J x1) (Hardware: X x12, X-1 x12, M-1 x12, Y x4) 455006-32.ACAY Carport.1211-18.GP.ENG.
STEP 01E: (Pieces: L x2, L-1 x4, L-2 x4, J x2) (Hardware: X x24, X-1 x24, M-1 x24, Y x4 for 2 side beams total) x2 STEP 02: (Hardware: X-2 x6, X-1 x6, V x4, M-1 x6) X-2 455006-32.ACAY Carport.1211-18.GP.ENG.
STEP 03: (Hardware: X-2 x12, X-1 x12, V x8, M-1 x12 for 2 side beams total) X-2 X-2 STEP 04: (Hardware: U x6, Q-1 x12, W x6 for 3 sets of braces total) 455006-32.ACAY Carport.1211-18.GP.ENG.
STEP 05: (Hardware: X x12, X-1 x12, M-1 x12) STEP 06: (Hardware: U x6, Q-1 x12, W x6 for 3 sets of braces total) 455006-32.ACAY Carport.1211-18.GP.ENG.
STEP 07: (Hardware: X x12, X-1 x12, M-1 x12) STEP 08: (Hardware: M x16, M-1 x16) 455006-32.ACAY Carport.1211-18.GP.ENG.
STEP 09: (Pieces: N x4, O x12) N STEP 10: At this point, verify that each of the legs is vertical and correctly located, and securely tighten any bolts that have been left loose. 455006-32.ACAY Carport.1211-18.GP.ENG.
STEP 11: (Pieces: P x14) 455006-32.ACAY Carport.1211-18.GP.ENG.
STEP 12: (Hardware: M x12 into end rafters; M x12 into main rafters; M-1 x24) M M M-1 M L-1 M-1 L-1 STEP 13: Anchor the unit as appropriate to your foundation. Anchoring hardware and tools not supplied with this unit. 455006-32.ACAY Carport.1211-18.GP.ENG.
STEP 14: (Hardware: Aa x56; Aa-1 x56; Aa-2 x56 for 14 roof panels total) Aa-1 Aa-2 Aa 455006-32.ACAY Carport.1211-18.GP.ENG.
MAINTENANCE NOTES 1. In case of a defective or damaged part, or for any other questions concerning the product, please contact the manufacturer directly. 2. Please have the parts list and part numbers on hand when ordering or requesting replacement parts. 3. The product should not be installed adjacent to trees or a sloped roof. Snow and ice may slide onto the roof and cause it to collapse. 4. While the product is designed for 4 seasons use, the snow must be cleared from the roof on a regular basis.
ABRI D’AUTO MODÈLE # 455006-32 GRIS GUIDE D’INSTALLATION NE DÉTRUISEZ PAS LES BOÎTES AVANT QUE L'ABRI SOIT COMPLÈTEMENT ASSEMBLÉ VEUILLEZ VÉRIFIER LE CONTENU DE CHAQUE BOÎTE A L’AIDE DE LA LISTE DES PIÈCES Trois adultes sont requis pour l’installation Dimensions: Global: 16.5pi x 11.83pi x 7.75pi (503cm x 361cm x 236cm) Base: 14.83pi x 11.67pi (451cm x 355cm) Intérieur: 10.75pi x 6.33pi à 6.92cm de clairance (328cm large x 193 à 211cm de clairance) Outils requis (pas inclus): Escabeau 6pi (1.
11.83pi x 16.5pi / 3.61m x 5.03m Abri Guide d’installation NE DÉTRUISEZ PAS LES BOÎTES AVANT QUE L'ABRI SOIT COMPLÈTEMENT ASSEMBLÉ VEUILLEZ VÉRIFIER LE CONTENU DE CHAQUE BOÎTE A L’AIDE DE LA LISTE DES PIÈCES IMPORTANT: GARDEZ POUR RÉFÉRENCE FUTURE, LISEZ ATTENTIVEMENT Consultez avec votre gouvernement ou municipalité locale concernant l’installation de structures temporaires avant l’achat ou l’assemblage.
QTÉ (11-741-32) POTEAU A 3 6 (11-757-32) CROCHET DE BASE B 3 12 (11-755-32) SUPPORT GAUCHE C 3 6 3 6 (11-756-32) SUPPORT DROIT D (11-748-32) JOINTURE DE GOUTTIÈRE E 2 2 (11-746-32) GOUTTIÈRE DROITE E-1 2 2 (11-747-32) GOUTTIÈRE GAUCHE E-2 2 2 (11-758-32) PLAQUE DE GOUTTIÈRE F-1 3 2 (11-759-32) PLAQUE DE GOUTTIÈRE F-2 (11-749-32) JOINTURE D’ARCHE H 3 3 DESSIN DESCRIPTION (11-742-32) MOITIÉ D’ARCHE DROITE H-1 (11-743-32) MOITIÉ D’ARCHE GAUCHE H-2 (11-753-32) MIPOUTRE CENTRALE I (1
(11-744-32) CHEVRON PRINCIPAL O 3 (11-767-32) PANNEAU DE TOIT P 1 DESSIN 3 (11-779-32) ÉCROU M-1 3 (11-770-32) BOULON X 3 3 M6x16mm (11-774-32) RONDELLE X-1 3 M6 (14-044-32) BOULON X-2 (11-778-32) VIS Y 3 (11-765-32) CLÉ Z 3 1 (11-771-32) BOULON Aa 3 56 +3 (11-772-32) ÉCROU Aa-1 3 (11-776-32) RONDELLE FREIN Aa-2 3 (11-775-32) RONDELLE V 3 14 40 +4 142 +5 spare (11-777-32) RONDELLE Q-1 3 (11-783-32) BOULON S 3 (11-784-32) RONDELLE S-1 3 72 +4 spare 3 (11-782-32) BOULON
ÉTAPE 01A: (Pièces: A x6, B x12, C x6, D x6) (Quincaillerie: T x24, Q-1 x48, W x24 pour 6 poteaux total) x6 ÉTAPE 01B: (Pièces: E x2, E-1 x2, E-2 x2, F-1 x2, F-2 x2, silicone pour le scellage (non-inclus) ) (Quincaillerie: X x24, X-1 x24, M-1 x24 pour 2 gouttières total) SILICONE 455006-32.ACAY Carport.1211-18.GP.ENG.
ÉTAPE 01C: (Pièces: H x6, H-1 x3, H-2 x3) (Quincaillerie: S x12, S-1 x24, S-2 x12 pour 3 arches total) x3 ÉTAPE 01D: (Pièces: I x1, I-1 x2, I-2 x2, J x2) (Quincaillerie: X x4, X-1 x4, M-1 x4 pour centre; X x8, X-1 x8, M-1 x8 pour bouts; Y x4 pour plaques) 455006-32.ACAY Carport.1211-18.GP.ENG.
ÉTAPE 01E: (Pièces: L x2, L-1 x4, L-2 x4, J x2) (Quincaillerie par poutre: X x4, X-1 x4, M-1 x4 pour centre, X x8, X-1 x8, M-1 x8 pour bouts, Y x2 pour plaques; 2 poutres total) x2 ÉTAPE 02: (Quincaillerie: X-2 x4, X-1 x4, V x4, M-1 x4 pour les bouts; X-2 x2, X-1 x2, M-1 x2 pour centre) X-2 455006-32.ACAY Carport.1211-18.GP.ENG.
ÉTAPE 03: (Quincaillerie: X-2 x12, X-1 x12, V x8, M-1 x12 pour 2 poutres total) X-2 X-2 ÉTAPE 04: (Quincaillerie: U x6, Q-1 x12, W x6 pour 3 arches total) 455006-32.ACAY Carport.1211-18.GP.ENG.
ÉTAPE 05: (Quincaillerie: X x12, X-1 x12, M-1 x12) ÉTAPE 06: (Quincaillerie: U x6, Q-1 x12, W x6 pour 3 arches total) 455006-32.ACAY Carport.1211-18.GP.ENG.
ÉTAPE 07: (Quincaillerie: X x12, X-1 x12, M-1 x12) ÉTAPE 08: (Quincaillerie: M x16, M-1 x16) 455006-32.ACAY Carport.1211-18.GP.ENG.
ÉTAPE 09: (Pièces: N x4, O x12) N N ÉTAPE 10: À ce point, vérifiez que chaque poteau soit vertical et correctement positionné, et serrez tout les boulons qui ne l’ont pas été encore. 455006-32.ACAY Carport.1211-18.GP.ENG.
ÉTAPE 11: (Pièces: P x14) 455006-32.ACAY Carport.1211-18.GP.ENG.
ÉTAPE 12: (Quincaillerie: M x12 dans chevrons finals; M x12 dans chevrons principaux; M-1 x24) M M M-1 M L-1 M-1 L-1 ÉTAPE 13: Ancrez l’unité de façon appropriée à votre fondation. La quincaillerie et les outils pour l’ancrage ne sont pas inclus avec ce produit. 455006-32.ACAY Carport.1211-18.GP.ENG.
ÉTAPE 14: (Quincaillerie: Aa x56; Aa-1 x56; Aa-2 x56 pour 14 panneaux total) Aa-1 Aa-2 Aa 455006-32.ACAY Carport.1211-18.GP.ENG.
NOTES D’ENTRETIEN 1. En cas de pièces défectueuses ou endommagées, ou pour questions concernant le produit, veuillez contacter le manufacturier directement. 2. Ayez, s’il-vous-plait, le nom et numéro de pièce en main quand vous commandez des pièces de remplacement. 3. Ne placez pas l’abri en dessous d’un arbre ou la pente d’un toit de maison. La neige ou la glace pourrai glisser et causer le gazebo de s’effondrer. 4.