Logic HE Balanced Flue Log Installation User Instructions

10
4a.3 The battery covers can be opened without tools by using a
fingernail and pressing to unhook the clip that retains the
cover, see Diagram 12.
12
Control Box
Remote Control
4a.4 The orientation of these is shown molded into the battery
compartment, see Diagram 13.
13
Remote Control
Control Box
Power Supply via Micro USB
It is possible to power the Control Box via a 5V
Micro USB connection, see Diagram 14.
If a USB lead is used batteries are not required in
the Control Box.
DO NOT CONNECT OTHER ELECTRIC DEVICES TO
THE CONTROL BOX.
4a.5 After fitting the batteries, slide the white Power Switch on
the Control Box to the ON position for the appliance to
operate, see Diagram 14.
14
Power Switch
Micro USB Port
Note: The white Power Switch does not need to be
turned off each time the appliance is not in use.
However, if the appliance is left unattended for long
periods of time (e.g. vacation), it is recommended
to place the Power Switch into the off position.
4b. Slide Control
4b.1 The battery box is located at the bottom left of the appliance
behind the ash cover, see Diagram 15.
15
9V Battery
Ignition
Unit
4b.2 Remove the old battery and replace with a new high quality
(Duracell or similar) 9V battery.
User Instructions