Design Electric Knife

3. Wash blades in hit soapy water with a soft cloth or sponge. Soak stubborn residues in
warm dish-water for ca. 10 minutes, before cleaning. Rinse thoroughly and dry completely.
Do not use abrasive scourcing pads or powders on blades.
4.
Wipe the motor housing and power cord with a damp soft cloth. Take care not to spill
or drip water or any other liquids on the motor housing.
5.
Thoroughly dry the motor housing and all parts of the appliance after each cleaning.
Leave all parts dry naturally where they are out of reach of young children. For
safety storage store the handle and the blades in the stand.
STORAGE
Always clean the appliance before storing (see ‘Care and Cleaning’).
Ensure to store the appliance where it is clean, dry and safe from frost, direct sunlight and
inadmissible strain (mechanical or electric shock, heat, moisture) and where it is out of
reach of young children. Place the appliance on a clean and stable surface, where it can
not fall. Do not place any hard or heavy objects on the appliance.
To avoid touching the blades unintentionally, it is good advice to store the blades in the
stand.
TECHNICAL SPECIFICATIONS
Model:
Art. No. 41600 Design Electric Knife
Power supply:
220-240 V AC, 50/60 Hz
Maximum power consumption:
120 W
Length of power cord:
approx. 100 cm
Weight:
approx. 1.56 kg
Dimensions:
approx. 435 x 51 mm (W x D)
Dimensions wooden stand:
approx. 160 x 205 x 270 mm (W x D x H)
22