Digital Marine Instrument Display Quick Start Manual

GMI 10 Quick Start Manual 15
Consult your Honda engine manual
to determine if the engine is NMEA
2000 compatible.
System Alarms and
Messages
NOTE: There are several possible
engine alarms. If the GMI 10
displays an engine alarm, contact
your engine manufacturer.
Boat Is Not Moving Fast Enough
to Calibrate—water speed
calibration – the boat is moving too
slow to calibrate.
Connection with NMEA 2000
Device Lost—the GMI 10 has lost
connection with a NMEA 2000
device.
Lost Satellite Reception—a
connected GPS antenna has lost
satellite reception.
NMEA Depth Is Below
Transducer—the NMEA depth
input is using the DBT sentence
which does not include keel offset.
NMEA 2000 Device Requires
Calibration—a NMEA 2000
device requiring calibration has
been detected.
Simulating Operation
—the unit
is in demo mode. Do not drive or
operate the boat while the GPS
device is in Demo mode. To change
the operating mode, select Menu
> Setup > System > Operating
Mode > Normal.