User Manual

Table Of Contents
Projecting a Waypoint
You can create a new location by projecting the distance and bearing from your current location to a new
location.
NOTE: You may need to add the Project Wpt. app to the activities and apps list.
1 From the watch face, press START.
2 Select Project Wpt..
3 Press UP or DOWN to set the heading.
4 Press START.
5 Press DOWN to select a unit of measure.
6 Press UP to enter the distance.
7 Press START to save.
The projected waypoint is saved with a default name.
Navigation Settings
You can customize the map features and appearance when navigating to a destination.
Customizing Navigation Data Screens
1 Hold MENU.
2 Select Navigation > Data Screens.
3 Select an option:
Select Map > Status to turn on or off the map.
Select Map > Data Field to turn on or off a data field that shows routing information on the map.
Select Elevation Plot to turn on or off the elevation plot.
Select a screen to add, remove, or customize.
Heading Settings
You can set the behavior of the pointer that appears when navigating.
Hold MENU, and select Navigation > Type.
Bearing: Points in the direction of your destination.
Course: Shows your relationship to the course line leading to the destination.
Setting Navigation Alerts
You can set alerts to help you navigate to your destination.
1 Hold MENU.
2 Select Navigation > Alerts.
3 Select an option:
To set an alert for a specified distance from your final destination, select Final Distance.
To set an alert for the estimated time remaining until you reach your final destination, select Final ETE.
To set an alert when you stray from the course, select Off Course.
4 If necessary, select Status to turn on the alert.
5 If necessary, enter a distance or time value, and select .
Navigation 89