User's Manual
Table Of Contents
- Getting Started
- Navigating with Waypoints and Routes
- Tracks
- Using the Main Pages
- Main Menu Features and Settings
- Camera and Photos
- Customizing Your Device
- Appendix
- Registering Your Device
- Updating the Software
- Viewing Important Device Information
- Contacting Garmin Product Support
- Using the Backlight
- Specifications
- Maximizing Battery Life
- About the Batteries
- Buying Optional Accessories
- Using Optional Fitness Accessories
- Data Management
- Attaching the Wrist Strap
- Attaching the Carabiner Clip
- Caring for the Device
- Troubleshooting
- Index
DRAFT
GPSMAP 62 Series Owner’s Manual 3
Getting Started
NiMH or lithium batteries for best
results (page 40).
Installing the Batteries
1. Remove the battery cover by
turning the D-ring 1/4 turn counter-
clockwise and pulling up.
2. Insert the batteries, observing
polarity.
3. Replace the battery cover.
For best results, after you install new
batteries, update the battery type in the
system settings (page 41).
Turning the Device On or
Off
Press and hold .
Setting Your Language
1. Turn on the unit.
2. Use the to select a
language.
Acquiring Satellite
Signals
It may take 30 to 60 seconds to acquire
signals.
1. Go outdoors to an open area.
2. If necessary, turn on the device.
3. Wait while the device searches for
satellites.
A question mark ashes while the
device determines your location.
4. Quickly press to open the
backlight status page.
The GPS bars indicate satellite