Specification

Gardner-Gibson, Inc. • P.O. Box 5449 • Tampa, Florida 33675-5449
Phone: [phone] • Fax [phone] • www.gardner-gibson.com
I-08
UNIVERSAL PATCHING FABRIC
Data Sheet
W
ARRANTY AND DISCLAIMER:
For limited warranty and disclaimer information, contact the Gardner-Gibson, Inc. corporate
office at 1-800-237-1155 or www.gardner-gibson.com.
450
D
ESCRIPTION:
U
niversal Patching Fabric is a durable membrane designed to reinforce
asphalt roof patching, white roof patching, stucco and masonry patches and driveway
p
roducts while repairing cracks, holes, seams and joints. Its durable open mesh weave
a
ssures thorough bonding and allows for expansion and contraction.
P
REPARATION:
R
emove any old and dried out cement, caulking, or coating from
cracks or holes. Surface should be dry and clean. If surface is metal, it should be rust
and scale free.
U
SES:
R
ecommended for use with asphalt roof patching, white roof patching, stucco
and masonry patches and driveway products. Use on: Roofs, Gutters, Chimneys,
C
opings, Drain Pipes, Foundation Walls, Flashings around TV aerials, Skylights,
Ventilators and all roof projections.
APPLICATION: Apply Universal Patching Fabric with patching compound. Fill up cracks
or holes with patch to the surf
a
ce. Trowel small amount of patch at one end of crack,
o
pen joint or loose seam as starting point for fabric. Center fabric over crack, seam or
hole, and spot stick fabric in patch. Unroll the fabric to cover defective area, leaving a 2"
minim
um overlap on all sides. Sandwich the fabric by covering with a additional layer of
p
atch, extending at least 2" beyond the fabric on all sides. Smooth and trowel to a feath-
ered edge
.
Before applying patch and fabric to a blistered area, cut the blister in a criss-
c
ross manner. Open up blisters and fold flaps back, removing any rotted materials and
drying out any moisture from underneath the blister. Trowel patch to cover exposed area
and bond old surfaces together. Fold cut flaps back to original position and press into
place. Cover with fabric and patch, using the same method as with cracks and holes.
P
RECAUTIONS:
A
void eye and skin contact. Loose fibers can cause irritation. Cloth or
leather glove
s are recommended.
Store in a dry place.
Meets Federal Spec. HH-C-466b and ASTM D 1668
©2008 Gardner-Gibson, Inc.
Man
uf
actured b
y / Fabricado por: Gardner-Gibson, Inc.
P.O. Box 5449, Tampa, FL 33675
See MSDS for more info
Appr
ox. Shipping Weights:
(Note:
All approx. weights include container.)
6 x 50 (12 rolls/case)
6.5 lbs./case
6 x 150 (12 rolls/case) 12 lbs./case
Average Net Wt.-oz./sq. yd. 2.25
Average Tensile strength
per 1" width:
Warp threads 85 Min.
Filling threads 85 Min.
Thickness .005
Width of roll 6"
Length of roll 50 ft., 150 ft.
TYPICAL PHYSICAL & PERFORMANCE CHARACTERISTICS
CAUTION: KEEP OUT OF REACH OF CHILDREN.