Lawn Mower User Manual

42 - English
6. MENU FUNCTIONS
6.4 Security (2)
Through this selection, settings relating to security
and the connection between the mower and the
charging station can be made.
Change PIN code (2-1)
Enter the new PIN code and press OK. Enter the
same code again and confirm by pressing OK. When
the PIN code is changed, a message stating that the
PIN code has been changed appears in the display
momentarily.
Make a note of the new PIN code on the designated
line in MEMO on page 4.
Security levels (2-2)
There are three security levels to choose from: low,
medium and high. Low and medium security prohibits
access to R40Li if the PIN code is unknown. High
security also includes a warning that sounds if the
correct PIN code is not entered after a designated time
period.
Time lock
This function entails that R40Li cannot be started after
30 days without first entering the correct PIN code.
When the 30 days has passed R40Li will continue to
mow as normal, but the Enter PIN code message
appears when the cover is opened. Enter your code
again and press OK.
PIN request
This function means that the R40Li requests a PIN
code when the main switch is set to 1 and each time
the cover is opened. The correct PIN code must be
entered to use R40Li.
If the wrong PIN code is entered 5 times in succession
the mower is blocked for a time. The blockage time is
extended for every new incorrect attempt.
Function Low Medium High
Time lock X X X
PIN request X X
Alarm X
IMPORTANT INFORMATION
We recommend using the High security level
at all times.
Change PIN code
Security level
New loop signal
Timer
Security
Settings