Installation Instructions
Table Of Contents
- 1 INTRODUCTION
- 2 GENERAL INFORMATION
- 3 INSTALLATION
- 4 COMMISSIONING
- 5 CONFIGURATION
- 6 OPERATION
- 7 CLEANING AND MAINTENANCE
- 8 TECHNICAL DATA
GL7p - Battery-powered, door-mounted electronic locker lock GL7p
Configuration
50
HB_GL7p--EN_12
www.gantner.com
BM
Information for service technicians
ReaderChip
FW
Firmware of the RFID reader electronics
Telemetry
Status information about the operation of the GL7p
Duration Locked [min.]
Counter that shows how long the GL7p was locked (in
minutes)
Integer
CNT activations last locking
Number of presses of the button since the last locking of
the GL7p
Integer
CNT door released while
locking
Number of cancelled closing operations
Integer
CNT write on card failed 1
Number of write errors to data carriers, first attempt
Integer
CNT write on card failed 2
Number of write errors to data carriers, second attempt
Integer
CNT write on card failed card
removed
Number of write errors to data carriers because the data
carrier was removed too soon from the reading field
Integer
BLE
FW
Firmware of the wireless interface electronics
BatteryMgt
Settings
Batt Idle MA
Information for service technicians
Integer
Batt Idle
Information for service technicians
Integer
Table 5.1 – Configuration settings for the GL7p in GAT Config Manager