BAYTOWN II SOLAR LAMP POST US Patent # 7172307 Patent Pending DIY Installation For Solar Lamp Post Instruction Manual Model: GS-105SG Visit our website or download the latest version of your instruction manual: www.gamasonic.com or www.gamasonic.
Introduction Thank you for your purchase. GAMA SONIC® solar charged accent lighting eliminates the problems associated with most solar lighting available today. GAMA SONIC® solar charged lights are brighter and last all night with a typical solar charge. Unique design, superior light output and numerous installation options confirm the outstanding value of our product. GAMA SONIC® has been recognized as a worldwide leader in the lighting industry for over 20 years.
. Turn on switch to desired setting. 4. Attach top(A) to the body(B) with the two supplied screw caps. A A D B A D 5. Attach Side handles provided. 6. Screw on top Ornament. 7. Assemble pole by screwing the four pieces together. Two easy ways for installation: Flat mount (8.1 - 8.2) EZ Anchor (9.1 - 9.
Flat installation (Installing the lamp post without anchor): 8.1 Mark three holes with the base plate as a template. With an electric drill, drill the holes into concrete. Assemble with the hardware provided. 8.2 After assembling attach the three decorative caps provided. and screw the fixture to the base. EZ Anchor Installation Instructions: 9.1 Attach Part (E) to Part (F) Using the four small screws from, as shown. 9.2 Insert the Turning bar (G) in the hole through the anchor stake (H) as shown. 9.
3. Operation Instructions 1. Remove the top (A) by unscrewing the 2 screw caps. Turn the operation switch to “summer” (for greater brightness) or “winter” (for longer duration) position. The Solar Lamp will automatically operate at dusk. 2. Reattach top (A) and secure with the 2 screw caps. 4. Batteries Read carefully the next section. Here you will learn how to add a secondary battery (optional), and how to replace your existing battery once it exceeds its life span. a.
b. Adding Secondary Battery (This solar light allows you to add a secondary battery. Follow the below instructions to install it.) 1. Unscrew the two screw caps and detach the top (B). Make sure the ON/OFF switch is in the OFF (O) position. 2. Unscrew the battery compartments screws located on the silver reflector and remove the compartment’s door to locate the empty compartment (Fig.2). 3. Make sure the battery is a Gama Sonic - 3.2V/1,500mAh, Li-ion Rechargeable Battery with a connector. 4.
WARNING: Do not dispose of Li-Ion battery in the regular trash, municipal waste stream or by fire as batteries may leak or explode. Do not open, short circuit, or mutilate batteries as injury may occur. Preserve our environment by recycling Li-Ion batteries or disposing of them in accordance with local, State and federal regulations. Do not mix old and new batteries. MAINTENANCE: Clean the solar panels regularly with a damp towel to guarantee optimum performance.
