Specification Sheet

Numbers indicated
inside parenthesis ( ) = mm
V G 295 150CA
Stainless steel control panel
Width 36" (90 cm)
Liquid gas
V G 295 250CA
Stainless steel control panel
Width 36" (90 cm)
Natural gas
Included accessories
1 wok attachment ring
Optional accessories
WP 400 001
Wok pan made of multiple-layer
material with round bottom and handle
ø 14 ³⁄₁₆", 6.3 qt., height 4".
200 series gas cooktop
V G 295
Control panel for comfortable and
secure operation
Mechanical power level regulation
for 9 power levels, with exact setting 
and reproduction of flame size
Multi-ring burner of solid, 
heat-resistant brass as used in
professional kitchen
Solid smooth-surface cast iron pan
supports
Up to 59,700 BTU (17.5 kW) on
5 burners
Cooking zones
VG 295 150CA
1 multi-ring wok burner 1,000 BTU – 
17,100 BTU (300 W – 5800 W), 
suitable for pots up to max. ø 12 ⅝".
2 two-ring high output burners 600 –
13,600 BTU (170 W – 4000 W), 
suitable for pots up to max. ø 11".
2 two-ring standard burners 600 –
6,800 BTU (170 W – 2000 W), suitable 
for pots up to max. ø 9 ½".
VG 295 250CA
1 multi-ring wok burner 1,000 – 18,800 
BTU (300 W – 6000 W), suitable for 
pots up to max. ø 12 ⅝".
2 two-ring high output burners 600 –
13,600 BTU (170 W – 4000 W), 
suitable for pots up to max. ø 11".
2 two-ring standard burners 600 –
6,800 BTU (170 W – 2000 W), 
suitable for pots up to max. ø 9 ½".
Operation
Control knobs with illuminated ring.
Integrated control panel.
One-handed operation.
Electric ignition.
Features
Three-part cast iron pan support with 
flat, continuous pot surface.
Brass burner rings.
Safety
Thermoelectric safety pilot.
Residual heat indication.
Operation indicator.
Planning notes
May not be combined with any Vario
cooktop. 
No intermediate shelf required.
Appliance can be snapped into the
countertop from above.
Rear panel and wall trims must be
heat-resistant and consist of a
non-flammable material.
Installation in a 36" (90 cm) wide base
cabinet is required.
A minimum lateral clearance of at least
11 ¹³⁄₁₆" (300 mm) from adjacent 
heat-sensitive cabinet or contact
surfaces must be observed or thermal
insulation fitted.
With a total connected load of more
than 37,533 BTU (11 kW), local 
regulations concerning room
ventilation, room size and combination 
of extraction or recirculation hoods 
must be observed. 
Minimum clearance between gas
cooktop(s) with more than 37,533 BTU 
(11 kW) and ventilation hood 30"
(76cm)
When installing this cooktop next to
another appliance of the Vario 200
series, a minimum clearance of 2" 
between the single cut-outs should
be observed.
Cooktop clamping range: 1 ¹³⁄₁₆" – 2".
Can be installed above the 36" EB 333 
oven with ½" minimum distance.
The appliance is not operable without 
electrical connection.
The distance from the top of the 
cooktop to the bottom of cabinets
above can be reduced to 26" when the
bottom of the wood or metal cabinet is
protected by no less than ¼" (6.35 mm)- 
thick flame-retardant millboard covered
with not less than No. 28 MSG sheet 
metal, 0.015 inch (0.4 mm) stainless 
steel, 0.024 inch (0.6 mm) aluminum 
or copper.
Appliance weight: approx. 68 lbs (31 kg).
Rating
Total rating: 58,000 / 59,700 BTU.
Total Amps: .1 A.
120 V / 60 Hz
Connecting cable 59" with
ground plug.
Gas connection
1
/2
"
2
15
/
16
"
(74)
1
3
/
4
"
(44)
1
1
/
4
"
(32)
(16.5) at the air intake slits
Minimum distance from the appliance cut-out to the side wall 11 (300 mm).
*4" (102mm) clearance for a combustible back wall.
13
/
16
"
(1.5 m)
min. 1
(8.5)
min. 2"*
min.
4
3
/
16
5
/
8
"
59
1
/
16
"
3
/
8
"
(35)
5
/
16
"
3
/
4
"
" (107)
19
3
/
8
"
±1/
16
"
(51)
(20)
(492
±2
)
8" (203)
36"
(914)
34
13
/
16
"
±1/
16
"
(885
±2
)
20
1
/
16
" (510)
www.gaggenau.com/us
Revised: 02 June 2020

Summary of content (1 pages)