User's Manual

Wireless Keyboard Slim
English - 3 -
Change communication code
The desktop has communication code to the computer to avoid the interference with
other desktop. You have to change the code if there is any interference. The
interference only exists when many sets of mouse & keyboard used at the same time.
Keyboard and Mouse ID wireless link will be changed separately.
i
 For the primary setup, both two
wireless linkages, one for receive
r
and mouse, another for receive and
keyboard, should be completed.
 The communication ID for mouse
and keyboard can be changed
separately.
 The setup must be completed within
one minute. If setup time exceeds
one minute, repeat procedure.
SLIM KEYBOARD
1. Press the connection button
“CONNECT” on the receiver,
Indicator RX lights.
2. Press the “RESET” button on the
bottom of the slim keyboard.
Indicator RX light will be off as
soon as the linkage is completed.
OPTICAL MOUSE
1. Press the connection button
“CONNECT” on the receiver,
Indicator RX lights.
2. Press the “RESET” button on the
bottom of the mouse. Indicator RX
light will be off as soon as the
linkage is completed.
Battery low warning
Mouse will echo "DE DE" as the batteries slowly get weaker. The echo will continue
to rise every 30 seconds, till batteries are charged or changed. From hearing the first
“DE DE” on, the mouse can still be used for half an hour longer.
Charging the rechargeable batteries
- Quickly Charging
Before using the mouse for the first time, place it in the charging unit of the receiver
for approximately 2 hours to charge the rechargeable batteries. When the mouse echo
battery low warning echo “DE DE”, it means the batteries are out of power. Please
charge the rechargeable batteries in the receiver.