Owner's Manual
Table Of Contents
- Before Getting Started...
- Using Mobile Link with a Mobile Phone
- Getting Ready
- Auto Time Adjustment
- Viewing Pedometer Data
- Viewing Stopwatch Data
- Configuring Stopwatch Target Time Settings
- Configuring Programmable Timer Settings
- Configuring World Time Settings
- Adjusting Hand Alignment
- Phone Finder
- Configuring Watch Settings
- Changing the Home City Summer Time Setting
- Connection
- Pedometer
- Stopwatch
- Timer
- Dual Time
- Alarms and Hourly Time Signal
- Adjusting the Time Setting Manually
- Illumination Light
- Hand Alignment Adjustment
- Battery Replacement
- Other Settings
- Moving to Another Time Zone
- Other Information
- Troubleshooting
Configuring Programmable
Timer Settings
You can use G-SHOCK Connected to
configure programmable timer settings and
create a group of multiple timers.
●
For information about the programmable
timer, refer to the information below.
l
Overview
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (D) for about two seconds.
When a connection is established
between
the
watch and phone,
e
will stop
flashing.
Trying to connect Connection successful
3.
Y
Perform the operation shown on the
screen to configure the programmable
timer settings.
Note
●
To
change
a timer title or delete a timer,
tap “Edit”.
Configuring World Time
Settings
Specifying a World Time City with G-SHOCK
Connected causes the watch’s World Time
City to change accordingly. The standard
time/summer time setting of the World Time
will be adjusted automatically without any
watch operation required by you.
Note
●
G-SHOCK Connected
World Time lets
you select from among approximately
300 cities as the World Time City.
● Selecting a World Time City
1.
Y
Tap the “G-SHOCK Connected
” icon.
2.
X
Hold down (D) for about two seconds.
When a connection is established
between
the
watch and phone,
e
will stop
flashing.
Trying to connect Connection successful
3.
Y
Perform the operation shown on the
phone screen.
The World Time setting will
be reflected on the watch.
●
You can check the World Time by
entering the Dual Time Mode.
● Configuring the Summer Time Setting
1.
Y
Tap the “G-SHOCK Connected
” icon.
2.
X
Hold down (D) for about two seconds.
When a connection is established
between
the
watch and phone,
e
will stop
flashing.
Trying to connect Connection successful
3.
Y
Perform the operation shown on the
phone screen to select a summer time
setting.
●
“Auto”
The watch switches between standard
time and summer time automatically.
●
“OFF”
The watch always indicates standard
time.
●
“ON”
The watch always indicates summer
time.
Note
●
While the summer time setting is
“Auto”, the watch will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
summer time
manually. Even if you are
in an area that does not observe
summer time, you can leave the
watch’s summer time setting as “Auto”.
●
Changing the time setting manually
with a watch operation will cancel auto
standard time/summer time switching.
●
A G-SHOCK Connected screen
shows information about summer time
periods.
Operation Guide 5554/5555
6