User's Manual Part 3

158
＜
Functions of Model Menu (Helicopter Functions)
＞
●Selectthefunction
nameandreturntothe
precedingscreenby
touchingtheRTNbutton
orpushingtheHome/Exit
button.
<SensorTouch™>
THR HOLD
This function sets the throttle cut position for
auto rotation. The throttle position can also be set
to an idling position. Setting of these 2 positions
can be selected by switch. This allows use for
switching during training.
Example of use
●Sincethrottleholdhas2modes(Cut)and
(Idle),usingitintheIdlingmodeduring
trainingandintheCutmodewhen
stoppingtheengineatmeets,etc.is
convenient.
Note:WhenthrottleholdissettoONinthenormal
condition,throttleholdactsandthethrottleservo
isdeactivated.AlwayssetthrottleholdtoONinthe
holdcondition.
●Settotheenginestopposition.
●Settotheidlingposition.
Setting method
●Operationmodeselection
 Manualmode(MANUAL):Thethrottlehold
functionisoperatedbyswitchoperation
only.
 Automode(AUTO):Thethrottleholdfunction
operationislinkedtothethrottlestick
position.
 Autopositionsetting:Whentheautomodeis
selected,thethrottleposition(autoposition)
canbeselected.Movethethrottlestickto
thepositionyouwanttosetandtouchthe
RTNbutton.(Autopositionisdisplayed.)
●Holdpositionadjustment
 ThrottleHold(Cut)setsthethrottlecut
position.Adjustitsothatthecarburetorisfull
close.
 ThrottleHold(Idle):Makethisadjustmentto
maintainidlingfortraining.Adjustments can
bemadebasedonthethrottlecurveidle
position.
●Thethrottleservooperating speedcanbe
adjusted.(Speed)
●Throttlecutortrainingfunctioncanbe
switchedbyholdfunctionselectorswitch.
Operation precautions
WARNING
When starting the engine, conrm that the idle up
condition and throttle hold condition are OFF.
(Currently selected condition name)
●Select[THRHOLD]atthemodelmenu
andcallthesetupscreenshown
belowbytouchingtheRTNbutton.
●Holdposition
●Currentposition
Scrolling
●Movingcursor
●Selectingmode
●Adjustingvalue
●Tonextpage