User's Manual Part 3

127
＜
Model Menu (Airplane/Glider Functions)
＞
●Selectthefunction
nameandreturntothe
precedingscreenby
touchingtheRTNbutton
orpushingtheHome/Exit
button.
<SensorTouch™>
RUDDER 2
RUDDER
RUDDER
V-TAIL
RUDDER 2
Winglet
RUDDER 1
Winglet
at Flying wing
at Flying wing
( )
( )
AIL 3
AIL 3
(Chip Aileron)
(Chip Aileron)
AIL1
(Main Aileron)
AIL 2
(Main Aileron)
AIL to RUD
[Correspondingmodeltype]:
Airplane/glider,general
Use this mix when you want to mix the rudders
with aileron operation.
●Amixingcurvecanbeset.
●MixingduringightcanbeturnedON/OFFby
settingaswitch.(AlwaysONat[--]setting)
●Themixingratecanbene-tunedbysettingaVR.
Setting method
●MovethecursortotheACT/INHitemand
touchtheRTNbuttontoswitchtothedata
inputmode.
 Turnthetouchsensortotheleftandtouch
theRTNbutton.(ONisdisplayed.)
●Whensettingaswitch,movethecursorto
the[--]itemoftheswitchandtouchtheRTN
buttontocalltheselectionscreen,andthen
selecttheswitchandsetitsONdirection.
(AlwaysONat"--"setting)
 (Foradescriptionoftheswitchselection
method,seethedescriptionatthebackof
thismanual.
●WhensettingaVR,movethecursortothe
FineTuning"--"itemandtouchtheRTN
buttontocalltheselectionscreen,andthen
selecttheVR.Theadjustmentratecanbe
set.TheVRoperationmodecanalsobe
selected.
[FinetuningVRoperationmode]
[LIN.] Mixingrate0%atcenterofVR.
WhentheVRisturnedclockwiseand
counterclockwise,themixingrate
increasesanddecreases,respectively.
[ATL+]Mixingrate0%atleftendofVR.
WhentheVRisturned,themixingrate
increases.
[ATL-] Mixingrate0%atrightendofVR.
WhentheVRisturned,themixingrate
increases.
[SYM.]WhentheVRisturnedtotheleftor
rightoftheneutralposition,themixing
rateincreases.
●Mixingcurvesetting
*For a description of the curve setting method, see the
description at the back of this manual.
●Left/rightoverall
adjustmentatRate
AandRateB
(Currently selected condition name)
●Select[AILtoRUD]atthemodel
menuandcallthesetupscreen
shownbelowbytouchingtheRTN
button.
●Group/singlemode
switching
(For more information, refer
to the description at the
back of this manual.)
*The display screen is
an example. The actual
screen depends on the
model type.
●FinetuningVRsetting
●Adjustmentrate
●Operationmode
●Amixingcurvecanbeset.
 (Foradescriptionofthecurvesetting
method,seethedescriptionatthebackof
thismanual.)
Scrolling
●Movingcursor
●Selectingmode
●Adjustingvalue
●Tonextpage