User's Manual Part 3

114
<Model Menu (Common Functions)>
conditionslist.
*The number before the condition name become reverse-
video to show that it is to be deleted.
2.Movethecursorto[RENAME]andtouchthe
RTNbutton.
*The condition name setup screen appears.
3.Changetheconditionnameasdescribed
below:
 [Movingcursorininputbox]
 Select[←]or[→],andtouchtheRTNbutton.
 [Deletingacharacter]
 When[DELETE]isselectedandtheRTNbutton
istouched,thecharacterimmediatelyafter
thecursorisdeleted.
 [Addingacharacter]
 Whenacandidatecharacterisselected
fromthecharacterlistandtheRTNbutton
istouched,thatcharacterisaddedatthe
positionimmediatelyafterthecursor.
*A name of up to 8 characters long can be entered as the
condition name. (A space is also counted as 1 character.)
5.Attheendofinput,select[ENTER]andtouch
theRTNbutton.(Toterminateinputand
returntotheoriginalstate,select[CANCEL]
andtouchtheRTNbutton.)
Condition copy
1.Usethetouchsensortomovethecursorto
anyconditionintheconditionslistandtouch
theRTNbutton.
2.Usethetouchsensortomoveto[COPY].
3.TouchtheRTNbutton.
*The copy screen appears.
4.Usethetouchsensortomovethecursorto
the"SOURCECOND."(copysource)itemand
touchtheRTNbutton.
*The models already saved are displayed at the right side of
the screen.
5.Afterusingthetouchsensortomovethe
cursortothecopysourcecondition,touch
theRTNbutton.
*The copy source condition is displayed at the "SOURCE
COND." position.
6.Usethetouchsensortomovethecursorto
"DESTIN.CND."(copydestination)andtouch
theRTNbutton.
*The models already saved are displayed at the right side of
the screen.
7.Afterusingthetouchsensortomovethe
cursortothecopydestinationcondition,
touchtheRTNbutton.
*The copy destination conditions are displayed at the
"DESTIN.COND." position.
8.Usethetouchsensortomovethecursorto
[COPY]andtouchtheRTNbutton.
9.WhentheRTNbuttonistouchedagain,copy
isexecuted.(OperatetouchsensororS1
buttontostopcopying.)
 TouchtheRTNbuttontoendadjustmentand
returntothecursolmovemode.
Priority change
1.Usethetouchsensortomovethecursorto
theconditionwhosepriorityyouwantto
changeintheconditionlist.
2.Movethecursorto[UP]or[DOWN]of
[PRIORITY]andtouchtheRTNbutton.(The
lastconditionbecomesthehighestpriority.)
*The initial setting condition cannot be shifted. The priority
is the lowest.
Condition delay setting
1.Usethetouchsensortomovethecursorto
theconditionyouwanttochangeinthe
conditionlistandtouchtheRTNbutton.
2.Movethecursorto[DELAY]andtouchthe
RTNbutton.
*The condition delay setup screen appears.
3.Usethetouchsensortomovethecursorto
the"DELAY"itemofthechannelyouwantto
setandtouchtheRTNbuttontoswitchtothe
datainputmode.
 Adjustthedelayamountwiththetouch
sensor.
 Initialvalue:0
 Adjustmentrange:0~27(maximumdelay)
 TouchtheRTNbuttontoendadjustmentand
returntothecursolmovemode.
● Thesettingmode(group[GROUP]/single
[SINGLE]mode)canbeswitched.
(For more information, see the description at the back of this
manual.)