User's Manual

SYSTEM CONFIGURATION
v
Interswitch connection
When multiple radars are used, connect, to the EC-3000, the HUB-3000 to the LAN1 port, and
HUB-100 to the LAN2 port. This configuration lets each radar as a standalone radar in case of
HUB malfunction.
Radar Component Combinations
RADAR
MODEL
ANTENNA
UNIT
TRANSCEIVER
UNIT
POWER SUPPLY
UNIT
FAR-3x10
FAR-3x20
XN12CF-RSB-128
XN20CF-RSB-128
XN24CF-RSB-128
RTR-105
PSU-014
RTR-106
FAR-3x20W
XN20CF-RSB-130
XN24CF-RSB-130
RTR-108
FAR-3x30S SN36CF-RSB-129 RTR-107
PSU-014
PSU-015
FAR-3x30SW SN36CF-RSB-131 RTR-109
FAR-3x30S-SSD SN36CF-RSB-133 RTR-111
PSU-016
PSU-018
EC-3000
PROCESSOR
UNIT
Radar Control Unit RCU-025
Trackball Control Unit RCU-026
ECDIS Control Unit RCU-024
Radar Control Unit RCU-025
Trackball Control Unit RCU-026
(Max. 2)
Select one
Select one
Serial 1,2 (IEC 61162-2)
Serial 3-7 (IEC 61162-1)
VDR
Switching
HUB
HUB-100
Sensor Adapter
MC-3000S
Serial
interface
Intelligent HUB
HUB-3000
POWER SUPPLY UNIT
ANTENNA UNIT
TRANSCEIVER UNIT
LAN3
LAN1
LAN2
100-230 VAC
1ø, 50-60 Hz
100-115/220-230 VAC
1ø, 50-60 Hz (For de-icer)
Sub Monitor
Gateway network
equipment
(Radar, ECDIS, etc.)
Serial8
LAN2
- Digital Out×6
(Power fail/system
fail/NO×2.NC×2)
- Digital in (ACK in)
Monitor Unit MU-190 MU-231
(or equivalent for -BB model)
Radar Control Unit RCU-025
Trackball Control Unit RCU-026
ECDIS Control Unit RCU-024
Radar Control Unit RCU-025
Trackball Control Unit RCU-026
(Max. 2)
Select one
Select one
Serial 1,2 (IEC 61162-2)
Serial 3-7 (IEC 61162-1)
VDR
- Digital Out×6
(Power fail/system
fail/NO×2.NC×2)
- Digital in (ACK in)
EC-3000
PROCESSOR
UNIT
LAN3
Serial8
LAN1
100-230 VAC
1ø, 50-60 Hz
Sub Monitor
100-115/220-230 VAC
1ø, 50-60 Hz
100-115/220-230 VAC
1ø, 50-60 Hz
Sensor Adapter
MC-3010A
Sensor Adapter
MC-3020D
Sensor Adapter
MC-3030D
Analog
interface
Digital in
interface
Digital out
interface
POWER SUPPLY UNIT
ANTENNA UNIT
TRANSCEIVER UNIT
100-115/220-230 VAC
1ø, 50-60 Hz (For de-icer)
Monitor Unit MU-190 MU-231
(or equivalent for -BB model)