Owner's Manual

30
TV Settings
Channel Settings
1. Press MENU button, the setup window will appear on the screen.
2. Use or to highlight Channel mode.
3. Use or to highlight the item you would like to reset, then press or to select the
settings.
4. Press OK to confirm your selections or settings and enter the sub menus.
5. Press MENU to return to the previous menu or press EXIT at any time to exit the setting.
Note: For Cable or Satellite users with a set-top box, there is no need to run channel Auto Scan.
Connect your cable or satellite set top box to one of the available inputs on the TV for viewing.
Channel Menu
Air/Cable
Set the reception type.
Press or to select Air or Cable.
● Select Air when TV is connected to an indoor / outdoor antenna.
● Select Cable if you subscribe to a pay television service WITHOUT a set top
box.
Auto Scan
Press or OK to enter
sub menu.
Cable System
Press or to select Auto, STD, IRC or HRC.
(Only available when you select Cable as the reception type.)
Start to Scan
Press or OK to start scanning available channels..
Favorite
Add or delete a channel in
the favorite list.
Press or to select a channel, then press or OK to add or delete the
channel in the favorite list.
Show/Hide


memory.
Press or to select a channel, then press or OK to show or hide the
channel.
Channel No.
Select a channel number
to be labeled
Press or to select a channel.
DTV Signal
Dynamically display the DTV signal status.