Furniture of America Overconfidence Division Eng Lak Thank yourself purchase! We hope you will enjoy your new product for many years to come. Our commitment to providing quality products doss not simply end when a purchase is. made. W stand behind our products and will provide any support needed in order for you to fully enjoy your purchaser. Your satisfaction is the gréatést contrition we could have: Because we value your trust in our company, we will do our best to meet your service expectations.
PER-ASSEMBLY INTRODUCTION Unless you are particularly adept at assembling turpitude, we understand building ready-to-assemble furniture can be a frustrating experience for some: To help avoid confusion and to make the assembly process knicker-and smoother, we have provided some helpful tips. Before you begin the assembly, please read the following: 1.
AU RETRY) 1pc 1pc 1pc 1pc 1pc apes | (11) 1pc lpc | (12) PCs Ipc ' (13) PCs PCs 3 (14) PCs Ipc ' (15) bps Before you'begin, please read “Assembly and Care Advice”, “Pr-Assembly Introduction” and “Cam Lock Fastener Assembly Instructionsg™.
ASSEMBLY INSTRUCTIONS SAFETY STRAP TO PREVENT TIP SAFETY STRAP TO PREVENT TIP-OVER Drywall: Select a location where you want the table to be mounted. Place the assembled table against the wall and, on the wall, mark the location where the anchor will be placed. Drill a hole slightly smaller then the size of the screw Push the anchor as far as it will go with your finger. Tap gently with a hammer until the anchor is flush with the wall surface.