ASSEMBLY INSTRUCTIONS TOOLS REQUIRED Allen Wrench {excluded) Phillips Screwdriver (Not Included} 2 People Recommended EASY DIFFICULT The Assembly Paling is a S-point system showing the level of effort needed to assemble a specific product.
CHECK BEFORE STARTING Are you missing anything? Double-check all parts, hardware and accessories listed on Page 6 are accounted for, Should we send any replacements? Are there any irregularities or flaws in the parts? We can send replacements! Check out our Quick Tips! We recommend reviewing the per-assembly handouts. Even experts need a refresher now and then Prep Time! Please review the assembly instructions and aff diagrams prior to assembling.
PRE ASSEMBLY INTRODUCTION We understand building ready-to-assemble furniture can be a challenging experience fur some. To help avoid confusion, we have provided some helpful tips that may speed up the process. O Teamwork ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage. Suitable Location Assembling near the area of the intended location is highly recommended.
ASSEMBLY AND CARE ADVICE FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. Turn clockwise to tighten and only tighten when step is competed or when instructed o do so. Position each part correctly and Insert screws or boils into their rasp active holes. Use the appropriate hand looks or power tools for assembly. Select steps, such as lightening sowers and/or bolts, may require hand fools to avoid causing damage during assembly.
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS Note : Every cam lock bolt must have a cam QQ:% lock connector in order 1o fasten the parts together. cam bolt cam lock screwdriver N | Screw the cam Insert the cam bolt into the bolt anti pane. bolt hole of joint panel. Align the cam lock with its side opening Turn the cam lock clockwise gently {or arrow} pointing to cam hoot until it will not turn any more.
COAT STAND » Please cheap institutions for Suture apprentice.
BRATS 1pc 1pc 1pc ~ Left cross bar Right cross bar Bottom wood board 1pc Drawer top board Front drawer frame Back drawer frame 1pc drawer frame Right drawer frame Left drawer board 1pc 1pc 1pc Right drawer board Back drawer board Front drawer board 1pc PCs PCs Bottom drawer board Hook 7718
ASSEMBLY INSTRUCTIONS (] 1 Note: . N Do not fully tighten all bolts until Align the back posts (#1, #3) fo top Part@) pct assembly is complete. This will angel then secure by using bolts Part@ ripe help all parts to assemble #H). J | properly.
ASSEMBLY INSTRUCTIONS 3 (#7) and bottom cross bar (410, #11), .
ASSEMBLY INSTRUCTIONS 5 expel Hardware@ dopes Hardware@) xiii #15 Align the back drawer frames (#15) to side drawer frames (#16, #17), then {_secure by using bolts Part @x1pc Hardware@ apexes Hardware@ exposes Hardware@ PCs Hardware@R) x1pc £ align the middle panel (46) to drawer frames (#15, #17), then secure by using i\bolts {#G, #H) and washers o 11/18
ASSEMBLY INSTRUCTIONS 7 Hardware Exposes Hardware@ apexes Hardware@ PCs Hardware@ ripe {’Align the drawer frames (#16) to Left posts (#1, #2}, then secure by using {_bolts (#G, #H) and washers 8 Part @xiii Part @PCs Hardware@m apes Hardware@ expel ! Align the bottom cross bars bottom panel (#8) to side cross bar (#10, #11) and middle panel then | secure by using bolts ; 12718
ASSEMBLY INSTRUCTIONS 9 ( Align the bottom wood board (#12) to bottom cross bar then secure using screws (#B) and washers Al expel Hardware PCs Hardwired Align the hooks (#23) to top panel then secure by using screws Part @PCS Hardware@?) epees 5 13718
ASSEMBLY INSTRUCTIONS 1 1 ( Align the drawer top board (#13) to drawer frames (#14, #15), then secure Part@ xpe | by using bolls (#G) and washers | Hardware@Q) dopes Hardware@@®) capes Hardware@ expel Part@d ioctl Part@19 pct Part@ PCs Hardware@ dopes ! Align the slides (#24) to drawer side ) ! Remark: There are gilding holes has | boards (#18, #19), then secure by using been prepared on the drawer side | screws J _boards (#18, #19).
ASSEMBLY INSTRUCTIONS 13 Part §2) expert Hardware@ apexes Part@ xiii Align the drawer bottom board (#22) | into drawer boards (#18, #19, #20). \ A 15/18
ASSEMBLY INSTRUCTIONS 15 Part §2) expert Hardware PCs Hardwired ' Align the cam bolts wooden : tenon (#J) into drawer front board Hardware PCs i Align the drawer front board (#21) to ) drawer frames (#18, #19), then secure | | by using cam locks page 5) ; 16/18
ASSEMBLY INSTRUCTIONS 17 Reinserting Drawers 1. Moving slide ball spacers to front. 2. Holding drawer vertically, and sliding runners into ball spacers.