Assembly Instructions ASSEMBLY RATING The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product {with 1 being easy and 5 being difficult). For some products, two persons are recommended. =.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEBE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES When lock of spring washer is used in Position each part correctly and insert an assembly, please make sure the screws or bolts into their respective lock or spring washer Is placed hales by hand Hieing or using the between the larger flat washer and the proper hand tool.
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed. Parts List Hardware List #1 ipo x2 #A x PCs x 2 Backrest W/Legs Bolt 1/4"X 1/2" Mm mm? fs #Bagpipes x 2 Bolt 1/4"X 5/8" PCs x 2 | Seat Frame Screw 1 #4 x 2p0s x 2 Leg V, #2 x 1pc x2 Seat Right Stretcher Support #50.
3. Insert 2 bolts (HA) into each end of the seat frame (#3) and wiles (#1) onto a secure using the Allen wrench, protected surface. 2. Align both ends of the seat frame (#3) to the per-drifled holes along the front of the backrest w/legs 2. Insert 2 bolts (#4) into each leg (#4) and secure using the Allen wrench, 1.
#A x apes #8 x apes Align the right stretcher support (#5R) to the right side of the backrest (#1) and seat frame 3. Insert a bolt {#B) into the hole connecting to the seat backrest with legs (#1) and secure using the Allen wrench. 4. Repeat the process for the left stretcher support 2. Insert a bolt {#A) into the hole connecting to the seat frame (#3) and secure using the Allen wrench. #C x PCs 2. Insert 4 screws (#C) from below and secure, 1.