Datasheet

ISDN Interface
Feature Description
CAPI CAPI 2.0 with CAPI user concept (password for CAPI use)
ISDN protocols Euro-ISDN (Point-to-mulitpoint/Point-to-point)
ISDN auto-configuration Automatic recognition and configuration of ISDN protocols
ISDN leased lines Supported leased lines: D64S, D64S2, TS02, D64S2Y
B channel protocols Excellent interoperability with other manufacturers (Raw HDLC, CISCO HDLC, X.75)
X.31 over CAPI Support for various connection paths: X.31/A for ISDN D-channel, X.31/A+B for ISDN
B-channel, X.25 within ISDN B-channel (also leased lines)
Bit rate adaption V.110 (1,200 up to 38,400 bps), V.120 up to 57,600 kbps (HSCSD) for connection to GSM
subscribers
VPN
Feature Description
PPTP (PAC/PNS) Point to Point Tunneling Protocol for establishing fo Virtual Privat Networks, inclusive strong
encryption methods with 128 Bit (MPPE) up to 168 Bit (DES/3DES, Blowfish)
PPP / PPTP hardware acceleration Integrated hardware acceleration for PPP/PTPP encryption algorithms DES, 3DES, MPPE
GRE v.0 Generic Routing Encapsulation V.0 according RFC 2784 for common encapsulation
L2TP Layer 2 tunnelling protocol inclusive PPP user authentication
Number of VPN tunnels Inclusive 110 active PPTP, L2TP and GRE v.0 tunnels (also in combination possible)
IPSec Internet Protocol Security establishing of VPN connections
Number of VPN tunnels Inclusive 10 active VPN tunnels, optional up to 110 IPSec tunnels
IPSec Algorithms DES (64 Bit), 3DES (192 Bit), AES (128,192,256 Bit), CAST (128 Bit), Blowfish (128-448 Bit),
Twofish (256 Bit); MD-5, SHA-1, RipeMD160, Tiger192 Hashes
IPSec hardware acceleration Integrated hardware acceleration for IPSec encryption algorithms DES, 3DES, AES inclusive
hardware acceleration for MD-5, SHA-1 Hash generation
IPSec IKE IPSec key exchange via preshared keys or certificates
IPSec IKE Config Mode IKE Config Mode server enables dynamic assignment of IP addresses from the address pool
of the company. IKE Config Mode client enables the router, to get assigned dynamically an IP
address.
IPSec IKE XAUTH (Client/Server) Internet Key Exchange protocol Extended Authenticaion client for login to XAUTH server and
XAUTH server for loging of XAUTH clients
IPSec IKE XAUTH (Client/Server) Inclusive the forwarding to a RADIUS-OTP (One Time Password) server (supported OTP
solutions see www.funkwerk-ec.com).
IPSec NAT-T Support of NAT-Traversal (Nat-T) for the application at VPN lines with NAT
IPSec IPComp IPSec IPComp data compression for higher data throughput via LZS
IPSec certificates (PKI) Support of X.509 multi-level certificates compatible to Micrososft and Open SSL CA server;
upload of PKCS#7/8/10/12 files via TFTP, HTTP, HTTP, LDAP, file upload and manual via FCI
IPSec SCEP Certificates management via SCEP (Simple Certificate Enrollment Protocol)
IPSec Certificate Revocation Lists
(CRL)
Support of remote CRLs on a server via LDAP or local CRLs
IPSec Dead Peer Detection (DPD) Continuous control of IPSec connection
IPSec dynamic IP via ISDN Transmission of dynamic IP address in ISDN D or B channel; free-of-charge licence necessary
IPSec dynamic DNS Enables the registering of dynamic IP addresses by a dynamic DNS provider for establishing a
IPSec connection.
IPSec RADIUS Authentication of IPSec connections at a RADIUS server. Additionally the IPSec peers, which
were configured on a RADIUS server, can be loaded into the gateway (RADIUS dialout).
IPSec Multi User Enables the Dial-in of several IPSec clients via a single IPSec peer configuration entry
IPSec QoS The possibility to operate Quality of Service (traffic shaping) inside of an IPSec tunnel
IPSec NAT By activating of NAT on an IPSec connection it is possible, to implement several remote
locations with identical local IP addess networks in different IP nets for the VPN connection
IPSec throughput (1400) 86 Mbps with 1400 Byte packets with AES 256 / AES 128 / 3 DES encryption
IPSec throughput (256) 19 Mbps with 1400 Byte packets with AES 256 / AES 128 / 3 DES encryption
Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - (0)911 9673 0
Fax: +49 - (0)911 688 0725
E-Mail: info@funkwerk-ec.com - www.funkwerk-ec.com
bintec R1202
08.09.2010
Subject to technical
alterations