Users Manual

7. Measurement
35
CAUTION
 The displayed ECG waveform size setting does not interact with the one
displayed on the receiving monitor.
If the ECG waveform size displayed on the receiving monitor is changed,
follow the instruction in the operation manual of the receiving monitor.
 When “Wide” is selected in the “QRS Detection” and if HR is outside the
display range (12 bpm to 300 bpm), 0 bpm will be displayed if 11 bpm
and below is measured and 300 bpm will be displayed if
300 bpm and above is measured.
 When “Narrow” is selected in the “QRS Detection”, and if HR is outside
the display range (30 bpm to 300 bpm), 0 bpm will be displayed if 29
bpm and below is measured and 300 bpm will be displayed if 300 bpm
and above is measured.