Installation Instructions

ManualsBrandsFujitsu ManualsComputers & AccessoriesTablet Computer

FCC and IC Regulatory Information

FCC and IC Regulatory Informat

ion

Please note the following regulatory information related to the wireless LAN

device.

Regulatory Notes and Stat

ements

Wireless LAN, Health and Authorization f or use

Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of

these emissions, however, are far much less than the electromagne tic energy emissions from wireless

devices such as mobile phones. Wireless LAN devices are safe for use by consu m ers because they

operate within the guidelines found in radio frequency safety standards and recommendations. The

use of Wireless LAN devices may be restricted in some situations or environments, such as:

• On board an airplane, or

• In an explosive environment, or

• In situations where the interference risk to other devices or services is

perceived or identi ﬁed as harmful.

In cases in which the policy regarding use of Wireless LAN devices in speciﬁc environments is

not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain

authorization to use these devices prior to operat ing the equipment.

Regulatory In

formation/Disclaimers

Installation and use of this Wireless LAN device must be in strict accordance with the instructions

included in the user docume ntation provided with the product. Any changes or modiﬁcations made

to this device that are not expressly approved by the m anufacturer may void the user’s authority to

operate the equipment. The manufacturer is n ot responsible for any radio or t elevision interference

caused by unauthorized modiﬁcation of this device, or the substitution or attachment of connecting

cables and equipment other than those speciﬁed by the manufacturer. It is the responsibility of the

user to correct any interference caused by such unauthorized modiﬁcation, substitution or atta chment.

The manufacturer and its authorized resellers or distributors will assume no liability for a ny damage

or violation of government regulations arising from failure to comply with these guidelines.

This device must not be co-located or ope rated in conjunction with any other anten na or transmitter.

For IEEE 802.11a Wireless LAN: For operation within 5.15~5.25 GHz frequency range, it is

restricted to indoor enviro nments, and the antenna of this device must be integral.

Federal Communications Commission and Industry

Canada statement:

This device complies with P art 15 of FCC Rules and Industry Canada license exempt RSS standard(s).

Operation is subject to the following two conditions: (1) This device may not cause

interference, and, (2) This device must accept any interference, including interference

that may cause undesired operation of this device.

90 Fujitsu

Summary of content (4 pages)

PAGE 1
FCC and IC Regulatory Information FCC and IC Regulatory Information Please note the following regulatory information related to the wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones.
PAGE 2
FCC and IC Regulatory Information Déclaration d’Industrie Canada Cet appareil est conforme à la Section 15 des Règles de la FC C et à la ( aux) norme(s) RSS concernant les appareils exempt s de licence par Industrie Canada. Son fonctionnement est soumis aux deux condition s suivantes : (1) cet appareil ne doit pas causer d’interférence nuisib le; (2) cet appareil doit accepter toutes les interférences reçues, y compris celles pouvan t causer un mauvais fonctionnement de l’appareil.
PAGE 3
FCC and IC Regulatory Information Déclaration de la FCC/d’Industrie Canada sur l’exposition aux radiofréquences La norme régissant l’exposition des appareils sans fil aux radiofréquences emploie une unité de mesure dénommée Taux d’absorption spécifique, ou TAS. La FCC et Industrie Canada ont défini la même limite de TAS : 1,6 W/kg. Cet appareil est conforme au TAS pour les limites d’exposition générales de la population/non contrôlées définies par les règles C95.
PAGE 4
FCC and IC Regulatory Information Avis pour le Canada Le matériel destiné à un usage sur la bande 5 150 - 5 250 MHz doit être utilisé uniquement à l’intérieur afin de réduire les risques de brouillage nuisible causé aux systèmes mobiles par satellite fonctionnant sur un même canal. Un gain d’antenne de 6 dBi est autorisé (pour le matériel utilisant les bandes 5 250 - 5 350 MHz, 5 470 - 5 725 MHz et 5 725 - 5 825 MHz), conformément à la limite p.i.r.e.