Español Français English OPERATING MANUAL MODE D’EMPLOI MANUAL DE FUNCIONAMIENTO KEEP THIS MANUAL FOR FUTURE REFERENCE CONSERVEZ CE MANUEL POUR RÉFÉRENCE ULTÉRIEURE CONSERVE ESTE MANUAL PARA SU FUTURA CONSULTA 9374136131-02_OM.
CONTENTS SAFETY PRECAUTIONS................................................ 1 FEATURES AND FUNCTIONS ....................................... 2 NAME OF PARTS ........................................................... 3 PREPARATION ............................................................... 4 OPERATION.................................................................... 5 TIMER OPERATION ....................................................... 7 SLEEP TIMER OPERATION .......................................
FEATURES AND FUNCTIONS ECONOMY OPERATION Limits the maximum operation current, and performs operation with the power consumption suppressed. When economy operation mode is operated, the room temperature will be little higher than the set-temp under cooling mode and lower than set-temp under heating mode. Therefore, the economy mode is able to save more energy than other normal mode.
NAME OF PARTS Display panel 16 17 20 Display 21 18 1 6 2 7 3 8 4 9 5 10 22 23 19 11 13 24 14 12 15 1 2 3 4 5 6 7 8 9 0 A B C D E “MODE” button “SET TEMP. ( / )” button “MIN.
PREPARATION CAUTION • Take care to prevent infants from accidentally swallowing batteries. • When not using the Remote Controller for an extended period, remove the batteries to avoid possible leakage and damage to the unit. • If leaking battery fluid comes in contact with your skin, eyes, or mouth, immediately wash with copious amounts of water, and consult your physician.
OPERATION To Select Mode Operation 1 The indoor unit’s OPERATION Indicator Lamp (green) will light. The air conditioner will start operating. Press the “MODE” button to select the desired mode. ▼ FAN ▼ HEAT ▲ ▲ Each time the button is pressed, the mode will change in the following order. AUTO COOL DRY ▲ 2 Press the “START/STOP” button. About 3 seconds later, the entire display will reappear. To Set the Room temperature Press the “SET TEMP. ( / Example: When set to COOL. )” button.
OPERATION To Stop Operation Press the “START/STOP” button. The OPERATION Indicator Lamp (green) will go out. About AUTO CHANGEOVER Operation AUTO: ● When AUTO CHANGEOVER operation first selected, the fan will operate at very low speed for about 1 minute, during which time the unit detects the room conditions and selects the proper operating mode.
TIMER OPERATION Before using the timer function, be sure that the Remote Controller is set to the correct current time (☞ P. 4). If the indoor unit is connected to a wired remote controller, the wireless remote controller cannot be used to set the timer. To Use the ON timer or OFF timer 1 2 Press the “START/STOP” button. (if the unit is already operating, proceed to step 2). The indoor unit’s OPERATION Indicator Lamp (green) will light.
SLEEP TIMER OPERATION Unlike other timer functions, the SLEEP timer is used to set the length of time until air conditioner operate is stopped. If the indoor unit is connected to a wired remote controller, the wireless remote controller cannot be used to set the sleep timer. To Use the SLEEP Timer While the air conditioner is operating or stopped, press the “SLEEP” button. The indoor unit’s OPERATION Indicator Lamp (green) lights and the TIMER Indicator Lamp (orange) light.
ADJUSTING THE DIRECTION OF AIR CIRCULATION ● Adjust the up, down, left, and right AIR directions with the “ and ● Use the “ and SET” buttons on the Remote Controller. SET” buttons after the Indoor Unit has started operating and the airflow-direction louvers have stopped moving. Vertical Air Direction Adjustment Vertical airflow louver control may not be available depending on the model. Press the “ SET” button (Vertical). (The Remote Controller’s display does not change.
SWING OPERATION Left/right and up/down/left/right swing operation cannot be performed on models that are not equipped with horizontal airflow louvers. Begin air conditioner operation before performing this procedure. To select SWING Operation Press the “ Each time the “ following order. SWING” button.
MINIMUM HEAT OPERATION • The room temperature can be maintained at 50°F by pressing the “MIN. HEAT” button so as to prevent the room temperature from falling too far. To use MINIMUM HEAT Operation Indicator Lamp OPERATION or TIMER or ECONOMY or Press the “MIN. HEAT” button. : Lighting : OFF The OPERATION Indicator Lamp (green) will go out, and the ECONOMY Indicator Lamp (green) will light. To stop MINIMUM HEAT Operation Press the “START/STOP” button.
SELECTING THE REMOTE CONTROLLER SIGNAL CODE When two or more air conditioners are installed in a room and the remote controller is operating an air conditioner other than the one you wish to set, change the signal code of the remote controller to operate only the air conditioner you wish to set (4 selections possible). When two or more air conditioners are installed in a room, please contact your retailer to set the individual air conditioner signal codes.
TROUBLESHOOTING WARNING • In the event of a malfunction (burning smell, etc.), immediately stop operation, turn off the electrical breaker and consult authorized service personnel. • Merely turning off the unit’s power switch will not completely disconnect the unit from the power source. • Always be sure to turn off the electrical breaker to ensure that power is completely off.
TROUBLESHOOTING Symptom CHECK ONCE MORE Doesn’t operate at all: Problem See Page ● Has the circuit breaker been turn off? ● Has there been a power failure? — ● Has a fuse blown out, or a circuit breaker been tripped? ● Is the timer operating? Poor Cooling (or Heating) performance: 7-8 ● Is the Air Filter dirty? ● Are the air conditioner’s intake grille or outlet port blocked? ● Did you adjust the room temperature settings (temperature) correctly? ● Is there a window or door open? ● In the case of Co
OPERATING TIPS AUTO Restart In Event of Power Interruption ● The power supply to the air conditioner is stopped by a power interruption. The air conditioner will then restart automatically in its previous mode when the power is restored. ● If a power interruption occurs during TIMER operation, the timer will be reset and the indoor unit will begin (or stop) operation at the new time setting. In the event that this kind of timer fault occurs, the TIMER Indicator Lamp will flash.
