Owner's Manual
Table Of Contents
- Before Use
- Notes on Disposing of the Camera
- About This Camera
- Part Names
- LCD Screen display
- Using the Select buttons
- Attaching the Shoulder Strap
- Charging the Battery
- Power On/Off
- Configure the initial settings
- Loading/Unloading the instax mini Instant Film Pack
- Basic Shooting and Playback
- Adding Effects to Your Photos
- Specifying an Effect Combination
- Various Shots
- Printing from Print History
- Using the Memory Card
- Using the Shooting Menu
- Using the PLAYBACK MENU
- Smartphone App Linked Functions
- Specifications
- Troubleshooting
- IMPORTANT SAFETY NOTICE
24
Smartphone App Linked Functions
The following functions are available when connected with the
“instax mini Evo” smartphone app.
Direct print function
This function allows you to send images from your smartphone to
the camera for instax printing. You can use the smartphone app to
move, rotate, and zoom the image before sending it.
Remote shooting function
You can set the flash and self-timer with the smartphone app and
take photos remotely.
Print image storage function
You can send images printed with the camera to the smartphone
app to save them as instax frame images on your smartphone.
Specifications
■ Camera Function
Image sensor 1/5-inch CMOS with primary color filter
Number of recorded
pixels
2560 × 1920
Storage media Internal memory,
microSD/microSDHC memory card
Storage capacity Approximately 45 images in internal
memory, approximately 850 images per
1GB in microSD/microSDHC memory
card
Recording method DCF compliant Exif Ver 2.3
Focus distance f = 28 mm (35 mm film equivalent)
Aperture F2.0
Auto focus Single AF (with AF Illuminator)
Shooting distance 10 cm to ∞
Shutter speed 1/4 second to 1/8000 second (automatic
switching)
Shooting sensitivity ISO100 to 1600 (automatic switching)
Exposure control Program AE
Exposure
compensation
−2.0 EV to +2.0 EV (1/3 EV step)
Metering method TTL 256 split metering, multi metering
White balance Auto, Fine, Shade, Fluorescent 1,
Fluorescent 2, Fluorescent 3,
Incandescent
Flash AUTO FLASH/FORCED FLASH/
SUPPRESSED FLASH
Shooting range with flash: Approximately
50 cm to 1.5 m
Self-timer Approximately 2 seconds / approximately
10 seconds
Image effects 10 lens effects, 10 film effects
Total of 100 effects by multiplying above
■ Print function
Exposure pixel
count
1600 × 600 dots
(800 × 600 dots when printed from
smartphone app)
Exposure resolution 25 dots/mm × 12.5 dots/mm
(635 × 318 dpi, 40 x 80 μm dot pitch)
12.5 dots/mm when printed from
smartphone app
(318 dpi, 80 μm dot pitch)
Exposure gradation RGB gradation of 256 colors
Interface Standard compliance: Bluetooth Ver. 4.2
(BLE)