Operation Manual

107106
Power Supply and Others
Power supply
Use one of the following :
i 4× AA-size alkaline batteries
i 4× AA-size Ni-MH (Nickel-Metal Hydride) batteries (sold separately)
i AC Power Adapter AC-5VH/AC-5VHS (sold separately)
Guide to the number of
available frames for battery
operation
Conditions for use
Temperature : 0°C to +40°C (+32°F to +104°F) ; 80% humidity or less (no
condensation)
Camera dimensions
112.7 mm × 81.1 mm × 79.3 mm/4.4 in. × 3.2 in. × 3.1 in.
(W
×
H
×
D)
(not including accessories and attachments)
Camera mass
(weight) Approx. 337 g/11.9 oz.
(not including accessories, batteries and xD-Picture Card)
Weight for photography
Approx. 479 g/16.9 oz.
(including batteries and xD-Picture Card)
Accessories
See P.7
Optional Accessories
See P.95
The number of available shots for battery operation given here is a guide to the number
of consecutive shots that can be taken under FUJIFILM test conditions.
i Batteries used : Using the alkaline batteries bundled with the camera
Using Ni-MH batteries at full charge
i Shooting conditions : Measured at normal temperature with 50% flash use
i Note : The number of available shots varies depending on the capacity of the alkaline
batteries and the amount of charge in the Ni-MH batteries. Consequently,
FUJIFILM makes no guarantee with regard to the numbers of available shots
for battery operation given here. Note that the number of available shots will be
lower at low temperatures.
Alkaline batteries
Approx. 260 frames
Approx. 270 frames
Ni-MH batteries 2100 mAh Approx. 420 frames Approx. 440 frames
Battery Type With LCD monitor ON With viewfinder (EVF) ON
✽ These specifications are subject to change without notice. FUJIFILM shall not be held liable for
damages resulting from errors in this Owner’s Manual.
✽ The LCD monitor on your digital camera is manufactured using advanced high-precision technology.
Even so, small bright points and anomalous colors (particularly around text) may appear on the
monitor. These are normal display characteristics and do not indicate a fault with the monitor. This
phenomenon will not appear on the recorded image.
✽ The operation error may be caused in a digital camera by the strong radio interference (i. e. electric
fields, static electricity, line noise, etc.).
✽ Due to the nature of the lens, the edges of photographed images may appear distorted. This is
normal and does not indicate a fault.
Specifications
Explanation of Terms
AF/AE Lock :
On the FinePix S5000, pressing the shutter button down half way locks the focus and exposure settings (AF and AE lock). If
you want to focus on a subject that is not centered in the frame or change the picture composition after the exposure is set,
you can obtain good results by changing the composition after the AF and AE settings are locked.
Auto Power Save Function :
If the camera is not used in any way for 30 seconds, this function switches features such as the monitor off (Sleep mode) to
prevent battery depletion and the waste of power when the AC power adapter is connected. If the camera is then left unused
for a further period, the Auto Power Save function switches the camera off. This period can be set to 2 minutes or 5 minutes
on this camera.
h The Auto Power Off function does not operate in PC mode, during automatic playback, or if it is disabled during setup.
Deactivated batteries :
Leaving an Ni-MH battery unused in storage for a long period may cause a rise in the level of substances that inhibit current
flow inside the battery and result in a dormant battery. A battery in this state is referred to as deactivated.
Because current flow is inhibited in a deactivated Ni-MH battery, the battery's original level of performance cannot be
achieved.
DPOF :
Digital Print Order Format
DPOF is a format used for recording information on a storage media (image memory card, etc.) that allows you to specify
which of the frames shot using a digital camera are to be printed and how many prints are made of each image.
EV :
A number that denotes Exposure Value. The EV is determined by the brightness of the subject and sensitivity (speed) of the
film or CCD. The number is larger for bright subjects and smaller for dark subjects. As the brightness of the subject changes,
a digital camera maintains the amount of light hitting the CCD at a constant level by adjusting the aperture and shutter
speed.
When the amount of light striking the CCD doubles, the EV increases by 1. Likewise, when the light is halved, the EV
decreases by 1.
Frame rate (fps) :
The frame rate refers to the number of images (frames) that are photographed or played back per second. For example,
when 10 frames are continuously photographed in a 1-second interval, the frame rate is expressed as 10 fps.
For reference, TV images are displayed at 30 fps.
JPEG :
Joint Photographics Experts Group
A file format used for compressing and saving color images. The higher the compression rate, the greater the loss of quality
in the decompressed (restored) image.
Memory effect :
If an Ni-MH battery is repeatedly charged without first being fully discharged, its performance may drop below its original
level. This is referred to as the “memory effect”.
Motion JPEG :
A type of AVI (Audio Video Interleave) file format that handles images and sound as a single file. Images in the file are
recorded in JPEG format. Motion JPEG can be played back by QuickTime 3.0 or later.
PC Card :
A generic term for cards that meet the PC Card Standard.
PC Card Standard :
A standard for PC cards determined by the PCMCIA.
PCMCIA :
Personal Computer Memory Card International Association (US).
Smear :
A phenomenon specific to CCDs whereby white streaks appear on the image when there is a very strong light source, such
as the sun or reflected sunlight, in the photography screen.
WAVE :
A standard format used on Windows systems for saving audio data. WAVE files have the “.WAV” file extension and the data
can be saved in either compressed or uncompressed format. Uncompressed recording is used on this camera.
WAVE files can be played back on a personal computer using the following software:
Windows : MediaPlayer
Macintosh : QuickTime Player
✽ QuickTime 3.0 or later
White Balance :
Whatever the kind of the light, the human eye adapts to it so that a white object still looks white. On the other hand, devices
such as digital cameras see a white subject as white by first adjusting the color balance to suit the color of the ambient light
around the subject. This adjustment is called matching the white balance. A function that automatically matches the white
balance is called an Automatic White Balance function.
Exif Print Format is a newly revised digital camera file format that contains a variety of shooting information for optimal
printing.
Quality mode
DPC-16 (16 MB)
DPC-32 (32 MB)
DPC-64 (64 MB)
DPC-128 (128 MB)
DPC-256 (256 MB)
Image Data Size
Number of recorded pixels
5
10
21
43
86
173
1.5 MB
2816 × 2120
3
19
40
81
162
325
780 KB
2048 × 1536
2
25
50
101
204
409
630 KB
1600 × 1200
1
470 KB
1280 × 960
Movie
$
DPC-512 (512 MB)
347 651 818
33
68
137
275
550
1101
2
4
9
18
37
75
CCD-RAW
6.7 MB
2816 × 2120
26 sec.
54 sec.
109 sec.
219 sec.
7.3 min.
14.6 min.
–
320 × 240
■ Standard number of available frames/recording time per xD-Picture Card
The number of available shots, recording time or file size varies slightly depending on the subjects photographed. Note also
that the divergence between standard number of available shots and the actual number of available shots is greater for
xD-Picture Cards with higher capacities.