Operation Manual
39
Advanced
Features
38
３３３３
Ｐ
１０００１０００ Ｆ３．２Ｆ３．２
ISO 200ISO 200
1
2
SPSP
３３３３
５００５００ Ｆ５．６Ｆ５．６
ISO 200ISO 200
B AUTO
Set the Mode dial to “B”.
This is the easiest mode to use and can be used
for most types of shot.
? SCENE POSITION
Set the Mode dial to “?”.
This mode provides options tailored to different
types of scene.
Four types of scene (
m, ,, . and /) appear on
the left side of the screen. Press “a” or “b”to
select the desired scene.
Macro mode cannot be used with any of the “?”
modes.
Explanation Available Flash modes
m Portrait
This is the best mode for shooting portraits. Skin tones are
shown beautifully and the overall tone is soft.
x/b/d/c/n
, Landscape
This is the best mode for shooting scenery in daylight and
provides crisp, clear shots of scenery such as buildings and
mountains.
Flash not available
✽
. Sports
This is the best mode for shooting sporting events. This mode
gives priority to faster shutter speeds.
x/d
/ Night scene
This is the best mode for evening and night scenes. This mode
allows you to take shots where priority is given to slow shutter
speeds of up to 2 seconds. To prevent camera shake, always
use a tripod.
c/n
B AUTO
/
? SCENE POSITION
STILL PHOTOGRAPHY FUNCTIONS
N PROGRAMMED AUTO
STILL PHOTOGRAPHY FUNCTIONS
Set the Mode dial to “N”.
This is an automatic mode that allows you to
specify any of the settings other than the shutter
speed and aperture.
This allows you to take shots relatively simply in the
same way as the Shutter-priority auto and
Aperture-priority auto modes (program shift).
Program shift
This function allows you to change the combination
of shutter speed and aperture without changing the
exposure setting, simply by pressing the “a” or “b”.
The shutter speed and aperture setting are
displayed in yellow when the camera is in Program
shift mode.
●
!
Program shift is automatically cancelled in the following
situations :
i When the Photography mode is changed
i When you switch to Playback mode
i When the camera is switched off.
✽ When the flash is popped up, “v” appears.
●
!
The dial cannot be turned to “m, ,, . or /”.