Operation Manual

31
Advanced
Features
30
1
Set the Power switch to “q”.
1Set the Mode dial to Still photography mode.
2Press the Photo mode “p” button.
3
1Press “d” or “c” to select the “y” QUALITY
setting and then press “a” or “b” to change the
setting.
2Press the “MENU/OK” button to confirm the
setting.
You can choose from 4 settings. Using the table
below as a guide, select the setting that best suits
your aims.
●
! The numbers to the right of each setting show the number of
available frames.
●
! When you change the quality, the number of available frames
also changes (➡P.23).
Quality settings in Still photography mode
ＱＵＡＬＩＴＹＱＵＡＬＩＴＹ
１９１９
３３ ＦＲＡＭＥＳ３３ ＦＲＡＭＥＳ
１０１０
２５２５
ＳＴＤＳＴＤ
ＡＵＴＯＡＵＴＯ
◆
Quality setting in High-sensitivity mode
◆
If you try to select a quality setting other than “1” when the camera is set to High-sensitivity mode,
“
^” is displayed blinking and the quality cannot be changed.
01 02
Printing at A4 size or printing part of the image cropped at A5 or A6 size.
Quality mode
5
6 MB (2816 × 2120)
Printing at A4 or A5 size or printing part of the image cropped at A6 size.
3
3 MB (2048 × 1536)
Printing at A5 or A6 size.
2
2 MB (1600 × 1200)
Printing at A6 size.
1
1 MB (1280 × 960)
Sample uses
y QUALITY MODE
(
NUMBER OF RECORDED PIXELS
)
p PHOTO MODE STILL IMAGE
3
Advanced
Features
2
01
02