BL00004849-100 FUJINON LENS GF63mmF2.
For Your Safety Be sure to read these notes before use Safety Notes Thank you for your purchase of this product. For repair, inspection, and internal testing, contact your FUJIFILM dealer. • Make sure that you use the lens correctly. Read these safety notes and the camera Owner’s Manual carefully before use. • After reading these safety notes, store them in a safe place.
WARNING Do not place on unstable surfaces. The product may fall, causing injury. Do not view the sun through the lens or camera viewfinders. Failure to observe this precaution can cause permanent visual impairment. CAUTION Do not use or store in locations that are exposed to steam, or smoke or are very humid or extremely dusty. Failure to observe this precaution can cause fire or electric shock.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. • You are cautioned that any changes or modifications not expressly approved in this manual could void the user’s authority to operate the equipment. Notes on the Grant: To comply with Part 15 of the FCC Rules, this product must be used with a Fujifilm-specified ferrite-core A/V cable, USB cable, and DC supply cord.
• Use a blower to remove dust and lint from the Before Using This Product Some lens features are not available with older versions of the camera firmware. Be sure to update the camera firmware to the latest version. Instructions on viewing the camera firmware version and updating camera firmware are available from the following website: http://www.fujifilm.
Parts of the Lens GF63mmF2.8 R WR A Lens hood B Mounting marks C Focus ring D Aperture ring lock release E Mounting marks (focal length) F Aperture ring G Lens signal contacts H Front lens cap I Rear lens cap Q The lens mount includes a rubber ring to ensure that the lens remains dust- and splash-proof. The ring can be replaced for a fee at any FUJIFILM service center.
Attaching the Lens Attaching the Hood See the camera manual for information on attaching and removing lenses. When attached, lens hoods reduce glare and protect the front lens element. Q This lens is for use exclusively with FUJIFILM G mounts and can not be used with X mounts. Removing the Caps Remove the caps as shown.
Aperture ring Rotate the lens aperture ring to choose the aperture (f-number). ): Set aperture to the value chosen with the AC( camera command dial. BA( ): Set aperture to the value chosen automatically by the camera. C Other values ( ): Set aperture to the selected value. R To select C or A, or to select another value after selecting C or A, press the aperture ring lock release while rotating the aperture ring.
Specifications Type Lens construction Focal length (35 mm format equivalent) Angle of view Max. aperture Min. aperture Aperture control Number of blades Stop size Focus range (measured from focal plane) Max. magnification External dimensions: Diameter × Length* (approx.) * distance from camera lens mount flange Weight* (approx.) * excluding caps and hoods Filter size GF63mmF2.8 R WR 10 elements in 8 groups f=63 mm (50 mm) 46.9° f/2.8 f/32 9 (rounded diaphragm opening) ⁄ EV (22 stops) 0.5 m – infinity 0.
