Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 10 6 x 27 mm E x 46 3 x 12 mm Ix2 4 x 20 mm B x 10 11 x 9 mm Fx4 Cx8 Dx4 6 x 30 mm 10 x 9.
11 10 8 9 7 6 3 4 13 1 2 5 4 1 12
1 A x 10 6 x 27 mm Insert quickfit screw(A) into corresponding holes in plate 6 and leg 2 and 3 with a screwdriver as shown.
Bx6 2 11 x 9 mm Connect leg 1 with plate 5, turn cam lock(B) in plate 5 clockwise to tighten as shown. Connect leg 1,2 and 3 with plate 4, turn cam lock(B) in plate 4 clockwise to tighten as shown.
3 Bx4 11 x 9 mm Attach plate 6 to the component, turn cam lock(B) in plate 4, 5 clockwise to tighten as shown. 4 B B 5 B B B 5 4 180° 6 6 4 Fx4 Kx1 15 x 10 mm Fix plate 6 with the base using screw(F) as shown.
5 Cx4 Kx1 6 x 30 mm Fix plate 7 and 8 to plate 6 using screw(C) as shown.
Ex2 6 Hx1 3 x 12 mm Fix part(H) to plate 6 using screw(E) as shown. E E H E 6 H Cx4 7 E 6 Kx1 6 x 30 mm Cover plate 11 to the top and fix with plate 7 and 8 using screw(C) as shown.
8 Place shelf 9 in as shown. 11 8 9 7 9 E x 16 3 x 12 mm Fix back plate 10 using screw(E) as shown.
E x 16 10 Dx4 Gx2 3 x 12 mm Fix hinge(D) to plate 12 and 13 respectively using screw(E) as shown. E G Fix part(G) to plate 12 and 13 respectively using screw(E) as shown. E E D E E G E E EE D 12 E E D E E G E E EE E D D 13 E E E E x 12 11 3 x 12 mm Attach door plate 12 to plate 7; door plate 13 to plate 8 by fixing hinge with screw(E) as shown.
Ix2 Jx2 4 x 20 mm Fix handle(J) with screw(I) as shown.
Qx1 Fix part(Q) to back of the unit.
Qx1 Install anti-tipping device as shown.