Display Cabinet Version:28/11/2022 1/20
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 29 6 x 35 mm B x 29 15 x 9 mm C x 24 6 x30 mm Fx2 DL x 1 DR x 1 Gx2 Hx8 Jx6 3 x 12 mm(BLACK) Mx2 4 x 12 mm R x 12 3 x 12 mm Nx2 Dx8 5 x20 mm CR x 1 Kx2 4 x 14 mm CL x 1 Lx2 6 x 30 mm 4 x 40 mm Ox6 E x 36 Px1 Qx5 4 x 30 mm 4 x 25 mm S x 12 (WHITE) 3 x 16 mm 3/20
1 2 4 14 13 5 13 6 12 5 13 15 11 3 7 14 13 8 13 9 10 16 22 19 21 20 18 17 4/20
A x 23 1 6 x 35 mm Insert quickfit screw(A) ino corresponding holes in plate 2,4,7,10,15 and 17 with a screwdriver as shown.
2 Ax6 Hx4 CL x 1 CR x 1 3 x 12 mm 6 x 35 mm Fix slide rail(CL) to plate 16 using screw(H) as shown. Fix slide rail(CR) to plate 3 using screw(H) as shown. Insert quickfit screw(A) into corresponding holes in plate 16 and 3 as shown.
3 Fx2 E x 12 4 x 14 mm Ox6 Mx2 Nx2 4 x 12 mm 4 x 25 mm Kx2 Fix part(K) to plate 1 using screw(M) as shown. M M M K K K 1 Fix hinge(O) to plate 11 and 12 using screw(E) as shown. E E E E EE O O EE O O EE N EE N O O EE O 12 11 F F N Fix knob(F) using screw(N) as shown.
Cx4 Bx4 4 15 x 9 mm 6 x 30 mm Attach plate 1 and 6 to plate 2 with wooden dowel(C), insert cam lock(B) into plate 1,6 and turn clockwise to tighten as shown. B B C C 1 2 BC 6 C B B C 180° 5 Connect two plate 13 with part 14 at first.
6 Slide plate 13 along grooves in plate 1 and 6. 1 2 6 13 13 Cx4 Bx4 7 15 x 9 mm 6 x 30 mm Attach plate 15 to plate 1 and 6 with wooden dowel(C), insert cam lock(B) into plate 1,6 and turn clockwise to tighten as shown.
8 Slide plate 13 along grooves in plate 2 and 15. 2 15 13 13 9 Jx4 4 x 40 mm Cx4 6 x 30 mm Attach plate 7 to plate 2 and 15 with wooden dowel(C), then fix using screw(J) as shown.
10 Bx3 15 x 9 mm Cx2 6 x 30 mm Attach plate 4 to plate 1,2 and 15 with wooden dowel(C), insert cam lock(B) into plate 1,2,15 and turn clockwise to tighten as shown. 4 C B C B B 2 B 180° 11 Bx3 15 x 9 mm 15 Cx1 6 x 30 mm BB 16 Attach plate 9 to plate 16 with wooden dowel(C) at first;attach plate 8 to plate 16, insert cam lock(B) into plate 8,9 and turn clockwise to tighten as shown.
Bx3 Cx1 15 x 9 mm 6 x 30 mm 16 B Attach plate 3 to plate 9 with wooden dowel(C) at first;attach plate 3 to plate 8, insert cam lock(B) into plate 8,9 and turn clockwise to tighten as shown. 8 B 3 9 C C B B 180° 13 Slide plate 13 along grooves in plate 3 and 16.
14 Bx3 Cx4 15 x 9 mm 6 x 30 mm Attach plate 10 to plate 3,9 and 16 with wooden dowel(C), insert cam lock(B) into plate 3,9,16 and turn clockwise to tighten as shown. 3 10 C B C C 16 B C 9 B C B 180° 15 Bx4 15 x 9 mm Cx4 6 x 30 mm Connect the two assembled components using wooden dowel(C), insert cam lock(B) into plate 3,16 and turn clockwise to tighten as shown.
16 E x 24 4 x 14 mm Attach door plate to the side of the unit by fixing hinge with screw(E) as shown.
17 If there is misalignment after you install, adjust the screw to the best condition 15/20
18 Bx5 15 x 9 mm Attach plate 18,21 and 19 to plate 17, turn cam lock(B) clockwise to tighten as shown. 180° 19 21 B B B B B 18 B B 17 19 Slide plate 20 along grooves as shown.
Qx5 20 4 x 30 mm Fix plate 22 with plate 18,21 and 19 using screw(Q) as shown. Q 22 Q 19 Q Q Q Q 18 21 Hx4 DL x 1 DR x 1 3 x 12 mm H H DR Fix runner(DL) and (DR) to plate 18 and 19 respectively using screw(H) as shown.
22 G x 2 (BLACK) P x 1 (BLACK) 3 x 12 mm Fix handle(P) to drawer face using screw(G) as shown. 17 P P 17 G G G G 23 17 Align rails, slide the drawer.
24 R x 12 S x 12 (WHITE) 3 x 16 mm Reinforce back plates using part(S) with screw(R) as shown. R 2 S R R S S RR S S 1 25 S S RR S R R S S R S R S R S R Dx8 5 x20 mm Insert part(D) into side plate and place shelf 5 in.
26 Lx2 Jx2 4 x 40 mm 6 x 30 mm Drill holes on your wall, knock into part(L). Fix the unit to wall using screw(J) as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.