Dresser Version:01/02/2023 1/19
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 77 B x 77 D x 36 E x 12 F x 50 6x35mm 14x9mm 6x30mm 300mm 4x16mm G x 26 Hx2 Jx2 4x30mm 3/19
All screw holes of this item have be pre-drilled. Please use hardware components in the correct reserved holes according to the figure and written instruction. Do not drill holes by yourself. x3 x3 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size x1 x1 x3 x1 x1 x3 x3 x6 x2 x3 x3 x3 x6 x6 x6 x6 5/19
1 Ax6 6x35mm Insert quickfit screw(A) into plate 9(x2) with a screwdriver as shown. x2 A A A A 2 Bx6 14x9mm Connect plate 9 with plate 10, put cam lock(B) into holes in plate 10 and turn clockwise to tighten as shown.
A x 11 3 6x35mm Insert quickfit screw(A) into plate 4 with a screwdriver as shown. A A A A A A A A A A A A 4 B x 11 14x9mm Attach the component to plate 4, put cam lock(B) into holes in plate 9,10 and turn clockwise to tighten as shown.
Ax6 5 6x35mm Flip plate 4, and insert quickfit screw(A) into corresponding holes as shown. A A A A A A A E x 12 6 F x 24 300mm 4x16mm Separate glide into two parts at first. Fix the slide rail(E) to all plate 5,7 and 6 using screw(F) as shown.
D x6 Bx6 7 14x9mm 6x30mm Attach plate 5,6 and 7 to plate 4 with wooden dowel(D) at first. Put cam lock(B) into holes in plate 5,6,7 and turn clockwise to tighten as shown. B D B B D B D D 8 B B I II III D B D D A Ax6 6x35mm Insert quickfit screw(A) into plate 3 with a screwdriver as shown.
Bx6 9 D x6 14x9mm 6x30mm Slide plate 8 along grooves as shown. Attach plate 3 to plate 5,6 and 7 with wooden dowel(D) at first. Put cam lock(B) into holes in plate 5,6,7 and turn clockwise to tighten as shown. D D B 10 III II III D B B D II B D D DB I A B B Ax6 6x35mm Insert quickfit screw(A) into plate 3 with a screwdriver as shown.
Bx6 11 D x6 14x9mm 6x30mm Attach plate 5,6 and 7 to plate 3 with wooden dowel(D) at first. Put cam lock(B) into holes in plate 5,6,7 and turn clockwise to tighten as shown. B II III D D BD B D B B D I BD D B A Ax6 12 6x35mm Insert quickfit screw(A) into plate 2 with a screwdriver as shown.
Bx6 13 D x6 14x9mm 6x30mm Slide plate 8 along grooves as shown. Attach plate 2 to plate 5,6 and 7 with wooden dowel(D) at first. Put cam lock(B) into holes in plate 5,6,7 and turn clockwise to tighten as shown. I II III D D D DB D B B B D B D B A B 14 Ax6 6x35mm Insert quickfit screw(A) into plate 2 with a screwdriver as shown.
Bx6 15 D x6 14x9mm 6x30mm Attach plate 5,6 and 7 to plate 2 with wooden dowel(D) at first. Put cam lock(B) into holes in plate 5,6,7 and turn clockwise to tighten as shown. I B B B D B II III D B D D B D B D D A 16 Ax6 6x35mm Insert quickfit screw(A) into plate 1 with a screwdriver as shown.
D x6 Bx6 17 14x9mm 6x30mm Slide plate 8 along grooves as shown. Cover plate 1 to plate 5,6 and 7 with wooden dowel(D) at first. Put cam lock(B) into holes in plate 5,6,7 and turn clockwise to tighten as shown. I II III D D D D D B B D B B D B B A B G x 24 18 4x30mm Fix plate 13 and 14 with plate 15 using screw(G) as shown.
19 A x 24 Bx 24 E x 12 F x 24 6x35mm 14x9mm 300mm 4x16mm A A A A A A A A Insert quickfit screw(A) into plate 11(x3) and 12(x3) with a screwdriver as shown. x3 B B B B B B B B Slide plate 16 along grooves as shown. Attach plate 11/12 to plate 13 and 14, put cam lock(B) into holes in plate 13, 14 and turn clockwise to tighten as shown. F B B A A F E E x3 Fix runner(E) to plate 13 and 14 using screw(F) as shown.
20 E Align rails, slide all drawers to corresponding positions. 21 Fx2 Hx2 4x16mm Fix cloth trip(H) to back of the item using screw(F) as shown.
22 Gx2 Jx2 4x30mm Install anti-tipping device as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
