Separate glides into 2 parts. Fix slide rail 28 to board 14 with screw(H) as shown.Please pay attention to the holes where the accessories are inserted. Insert quickfit screw(A) into corresponding holes in board 14 with a screwdriver as shown. Attach board 22 to board 14 with with wooden dowel(C) and turn cam locks(B) clockwise to tighten as shown.
Insert quickfit screw(A) into corresponding holes in board 14 as shown. Attach board 12 to board 14 with wooden dowel(C) and turn cam locks(B) clockwise to tighten as shown.
Attach board 11 to board 14 with screw(D) as shown. Fix bar 5 to board 11 with screw(F) as shown.
Connect bar 7 to board 14 with screw(G) at first. Attach board 1 and board 2 to the component with screw(G) as shown.
Fix part(I) to board 10 with screw(H) at first. Insert quickfit screw(A) into corresponding holes in board 10 as shown.
Cover board 10 to the top of the component. Fix board 1,2 to board 10 with screw(E). Fix board 14 to board 10 with wooden dowel(C) and turn cam locks(B) clockwise to tighten as shown. Fix bar 7 to board 10 with screw(F).
Fix slide rail 28 to board 13 with screw(H) as shown.Please pay attention to the holes where the accessories are inserted. Insert quickfit screw(A) into corresponding holes in board 13 and 15 with a screwdriver as shown.
Attach board 13 and 15 to side of the unit with wooden dowel(C) and turn cam locks(B) clockwise to tighten as shown.
Fix board 13 to frame 1, board 15 to frame 2 with screw(H) as shown.
Fix back board 30 to the assembled unit with screw(E) as shown.
Reinforce the back board with part(P) and nail(O) as shown. Fix leg support 31 to board 11 with screw(H) as shown.
Attach board 24 and 25 to board 26 with screw(D) as shown. Slide board 27 into available slots as shown.
Insert quickfit screw(A) into board 23 with a screwdriver as shown.
Attach board 23 to the component and turn cam locks(B) clockwise to tighten as shown. Fix handle(J) with screw(K) as shown.
Fix runner 28 to drawer sides with screw(H) as shown . Align rails, slide all drawers.
Fix handle(J) to board 9 with screw(K) as shown. Insert part(L) to board 9 as shown.
Assemble board 9 to the unit as shown.
Fix part(I) to board 19 with screw(H) as shown. Insert quickfit screw(A) into board 19 with a screwdriver. Attach board 17 to board 19 and turn cam locks(B) clockwise to tighten as shown.
Insert quickfit screw(A) into board 17 with a screwdriver. Attach board 21 to board 17 with wooden dowel(C) and turn cam locks(B) clockwise to tighten as shown.
Attach board 20 to board 17 with screw(D) as shown. Fix bar 5 to board 20 with screw(F) as shown.
Attach board 16 to 3, board 18 to 4 with screw(H) as shown.
Insert quickfit screw(A) into board 16 and 18 with a screwdriver as shown.
Attach board 16 and 18 to sides of the component with wooden dowel(C) and turn cam locks(B) clockwise to tighten. Fix board 3 and 4 with screw(G) as shown.
Fix back board 29 to the assembled unit with screw(E) as shown.
Reinforce the back board with nail(O) as shown.
Fix handle(J) to board 8 with screw(K) as shown. Insert part(L) to board 8 as shown.
Assemble board 8 to the unit as shown.
Connect two assembled components with screw(F) as shown.
Fix part(M) to board 19 with screw(H) at first. Fix part(N) to a proper position on your wall, fix part(M) to part(N) with screw(D) as shown.