Reception Desk Version:11/21/2022 1/30
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 24+2 B x 16+1 C x 51+2 M5 x 40 mm M5 x 42 mm Ex1 F x 6+1 Gx4 H x 8+1 M5 mm 6 x 40 mm M4 x 96 mm M4 x 18 mm Ix2 J x 8+1 Kx2 M3 x 18 mm DW M3.5 x 12 mm M x 20 N x 12 20 x 1 mm M3.
9 1 10 3 8 4 17 21 23 18 22 19 24 15 20 17 16 7 21 15 11 6 14 4/30 2 23 18 12 13 5
/30
A x 4 1 M3.5 x 12 mm Separate glide, fix slide rail 25 to both sides of plate 7 with screw(A) as shown. Please pay attention to the holes where the accessories are inserted and don't use an electric screwdriver or use force to rotate, may cause crack.
2 Bx2 M5 x 40 mm Attach plate 7 to plate 11 and fix with screw(B) as shown.
Ax4 3 Cx4 M3.5 x 12 mm M5 x 42 mm Fix slide rail 25 to plate 6 with screw(A) as shown. Insert quickfit screw(C) into corresponding holes in plate 6 as shown. 25 A A A A 25 6 6 A C 6 C C Flip the plate, assemble a glide with screw(A) and insert quickfit screw(C) as well. 25 A A A C 6 6 A A 25 Please pay attention to the holes where the accessories are inserted.
4 Dx2 15 x 10 mm Attach plate 6 to plate 11, insert cam lock(D) into plate 11 and turn clockwise to tighten as shown. D 6 11 D 11 5 6 D Cx4 M5 x 42 mm Insert quickfit screw(C) into corresponding holes in plate 8 with a screwdriver C as shwon.
6 Dx4 Ex1 15 x 10 mm M5 mm Attach plate 8 to plate 6 and 7, insert cam lock(D) into plate 6 and 7 and turn clockwise to tighten as shown. Insert screw(E) into the corresponding hole in plate 6 as shown.
7 Cx2 M5 x 42 mm Insert quickfit screw(C) into plate 10. 10 C C C 8 Dx2 15 x 10 mm Attach plate 10 to plate 9, insert cam lock(D) into plate 9 and turn clockwise to tighten as shown.
9 Ax2 Cx4 M3.5 x 12 mm M5 x 42 mm Fix slide rail 25 to plate 5 with screw(A). Insert quickfit screw(C) into plate 5 as shown. Please pay attention to the holes where the accessories are inserted.
10 Ax2 M3.5 x 12 mm Cx6 M5 x 42 mm Fix slide rail 25 to plate 4 with screw(A). Insert quickfit screw(C) into plate 4 as shown. Please pay attention to the holes where the accessories are inserted.
11 Dx2 Bx2 M5 x 40 mm Fx2 15 x 10 mm 6 x 40 mm Attach plate 13 to plate 6 with wooden dowel(F) at first. Attach plate 12 to plate 6, turn cam lock(D) clockwise to tighten. Attach plate 10 to plate 8 and fix with screw(B) as shown.
12 Dx6 15 x 10 mm Attach plate 4 to the component and turn cam locks(D) clockwise to tighten as shown.
Dx4 13 Fx2 15 x 10 mm 6 x 40 mm Connect plate 5 with plate 13 using wooden dowel(F) at first. Cover plate 5 to plate 8,12 and plank 3, turn cam lock(D) clockwise to tighten as shown.
14 C x 19 M5 x 42 mm Insert quickfit screw(C) into plate 1 and 2 as shown.
15 Fx2 6 x 40 mm 20mm Connect plate 1 and 2 with wooden dowel(F) as shown.
D x 19 16 15 x 10 mm D 4 1 Attach plate 1 and 2 to the back of the component and turn cam lock(D) clockwise to tighten as shown.
17 B x 12 M5 x 40 mm Attach plate 17 and 18 to plate 21 with screw(B), attach plate 19 and 20 to plate 22 with screw(B) as shown.
18 Slide plate 23 and 24 into available slots respectively as shown.
19 C x 12 M5 x 42 mm Insert quickfit screw(C) into plate 15 and 16 respectively as shown.
20 D x 12 Gx3 15 x 10 mm Hx6 M4 x 96 mm M4 x 18 mm Attach plate 15 to plate 17 and 18, turn cam lock(D) clockwise to tighten as shown. Attach plate 16 to plate 19 and 20, turn cam locks(D) clockwise to tighten as shown. G Fix handle(G) to plate 15 and 16 with screw(H) respectively as shown.
A x 12 21 M3.5 x 12 mm Fix runner 25 to plate 17,18,19,and 20 respectively with screw(A) as shown.
22 Ix2 Jx8 M3 x 18 mm I I 15 J J J X2 J Fix lock(I) to plate 15 with screw(J) as shown.
23 Nx4 Kx2 Gx1 Hx2 M3.5 x 14 mm DW M4 x 96 mm M4 x 18 mm N N K Fix hinge(K) to plate 14 with screw(N) as shown. Fix handle(G) to plate 14 with screw(H) as shown.
24 Nx8 M3.5 x 14 mm Attach plate 14 to plate 5 by fixing hinges with screw(N) as shown.
25 If there is misalignment after you install, adjust the screw to the best condition.
26 Lx1 M x 20 60 mm 20 x 1 mm Align rails, slide drawers.
27 4 1 5 4 26 1 26 5 30/30
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.