Chest Version:07/04/2022 1/12
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size C x 40 3 x 12 mm CL x 5 D x 32 E x 32 6 x 35 mm 15 x 9 mm DR x 5 DL x 5 Fx8 8 x 30 mm G x 25 4 x 35 mm J x 10 Kx5 Lx1 3.
1 3 4 2 5 6 7 8 8 11 12 13 10 9 x5 4/12
1 Dx8 C x 20 3 x 12 mm CR x 5 CL x 5 6 x 35 mm Fix runner CL&CR to panel 2 and 3 as shown. Insert quickfit screw D into panel 2 and 3. Please pay attention to the holes where the accessories are inserted and don't use an electric screwdriver.
2 Ex8 15 x 9 mm Attach panel 4 and 5 to panel 2, turn cam lock E clockwise to tighten as shown. I Attach panel 3 and turn cam lock E clockwise to tighten as shown.
3 D x 24 J x 10 6 x 35 mm 3.5 x 14 mm Insert quickfit screw D into panel 1 and 9 as shown. Fix handle K to panel 9 with screw J as shown. D Kx5 D D 1 D J J K D J D D D K D J 9 x5 4 Fx4 6 x 30 mm F F 6 F Insert wooden dowels F to the corresponding holes in panel 3&2 slightly. Slide panel 6 to the available slots in panel 3&2 as shown.
Ex4 5 15 x 9 mm 1 I E E E 3 E II III Cover panel 1 to panel 2 and 3, turn cam lock E clockwise to tighten as shown. 1 2 Fx4 6 6 x 30 mm 6 2 Flip the assembled component 180°. Insert wooden dowels F to the corresponding holes in panel 3&2 slightly. Slide panel 6 to the available slots in panel 3&2.
7 Gx4 4 x 35 mm Attach panel 7 to panel 2&3 using screw G. Please note don't use an electric screwdriver or use force to rotate, may cause crack. G G G 7 G G 2 3 8 Hx4 Lx 1 6 x 30 mm L Fix legs 8 to panel 7 using nail H as shown.
G x 20 9 4 x 35 mm Attach panel 10 and 11 to panel 12 using screw G. as shown. G G 12 G 11 10 G 12 G x5 10 G 10 Slide panel 13 to available slots in panel 10&11.
E x 20 15 x 9 mm Attach panel 9 to the assembled component, then turn cam locks E clockwise to tighten as shown. I E E 13 10 9 E x5 E 12 9 E C x 20 DR x 5 DL x 5 3 x 12 mm Fix runner DR&DL to panel 11&10 using screw C. Please pay attention to the holes where the accessories are inserted.
14 Gx1 4 x 35 mm Nx1 Mx1 4 x 14 mm Px1 6 x 30 mm If you want to stabilize the unit, you could choose install anti-tipping device as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
