Sideboard Version:07/03/2022 1/11
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size CR x 2 CL x 2 DR x 2 DL x 2 300 mm 300 mm 300 mm 300 mm C x 16 D x 12 E x 12 Fx8 3 x 12 mm G x 12 4 x 35 mm 15 x 9 mm 6 x 35 mm Hx4 Ix1 6 x 30 mm 6 x 30 mm Jx4 3.
1 3 5 2 4 6 6 9 10 11 8 7 x2 4/11
1 CR x 2 CL x 2 300 mm 300 mm Cx8 3 x 12 mm Fix slide rail(CL) and (CR) to No.2 and No.3 plate with screw(C) as shown. C C C 2 C CL C C 3 CL C CR C C CR CL 2 Dx4 6 x 35 mm Insert quickfit screw(D) into corresponding holes in No.1 plate with a screwdriver.
3 Ex4 Fx8 15 x 9 mm 6 x 30 mm Attach No.2 and No.3 plate to No.1 with wooden dowel(F), then turn cam lock(E) in No.2.3 plates clockwise to tighten as shown. I II Insert wooden dowel(F) into the top of No.2 and No.3 plate as shown.
4 Slide No.5 plate into available slots as shown. 5 2 3 5 1 Gx4 4 x 35 mm Attach No.4 plate to the component and fix with screw(G) as shown.
6 Ix1 Hx4 6 x 30 mm Fix No.6 leg to No.4 plate with screw(H) as shown. H I H 6 H 4 I H 6 H 3 7 4 1 Jx4 Dx8 6 x 35 mm 6 Kx2 3.5 x 14 mm Insert quickfit screw(D) into No.7 plate with a screwdriver. Fix handle(K) with screw(J) as shown.
8 Gx8 4 x 35 mm Attach No.8 and No.9 plate to No.10 with screw(G) as shown. G G 10 G G 8 9 10 G x2 8 G 9 Slide No.11 plate into available slots as shown.
Ex8 10 15 x 9 mm Attach No.7 plate to the component and turn cam lock(E) clockwise to tighten as shown. E 9 I II E 11 8 8 7 E E x2 E 7 E 180° 11 DR x 2 DL x 2 300 mm 300 mm Cx8 3 x 12 mm Fix runner(DL) and (DR) to No.8 and No.9 plate with screw(C) as shown.
12 Align rails, slide drawers.
