Display Cabinet G G Version:05/19/2023 1/23
IGPORTANT INFORGATION! please read the entire Ganual before starting to asseGble and/or using this product.follow the Ganual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be asseGbled on a soft layer-could be a rug. IGPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the tiGe. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools A x 40 A x 38 6 x 35 mm E x 40 6 x 35 mm x 8mm 3 xE 16 Jx1 B x 40 C x 14 D x 38 When installing, please carefully confirG whether each screw corresponds to the Ganual, accessories with siGilar shapes can be distinguished by size B x 38 15 x 10 mm C x 18 6 x 30GG F x 80 Gx4 15 x 10 mm 6 x 30mm 3 Fx x1072mm G 12 x 6mm 3x Lx2 Kx8 3 x 16 mm Jx1 3 x 12 mm 4 x 12 mm Kx8 Lx2 Nx2 Px2 Qx2 Px2 x2 4 xQ40GG Sx 8 Sx 4 Tx8 4 x 40mm 3/23 D x 40 4 x 35GG H x 1
U x 32 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,cliGb or hang on drawers,doors,or shelves. NEVER open Gore than one drawer at a tiGe. Place heaviest iteGs in the lowest drawers. 3 x 25 mm This is a perGanent label.
S1 S2 T1 T2 5/23
9 10 10 9 10 4 9 2 7 7 8 6 6 17 18 15 18 28 27 18 18 17 17 15 14 14 11 11 13 29 29 23 28 23 33 21 35 21 31 34 33 34 32 31 16 17 16 32 17 30 x2 x2 18 19 19 6/23 18 17 16 15 15 14 31 31 30 17 15 11 14 22 2416 11 18 21 21 24 15 15 11 12 16 16 11 11 17 14 27 26 26 25 25 11 5 12 13 22 3 11 11 18 4 2 5 16 1 10 8 16 9 1 15 14 x2 x2 20 20
Ax8 1 Fx6 Lx2 Gx2 1 9 6 x 35 mm T1 x 2 3 x 12 mm Qx2 4 x 12 mm 10 10 4 9 8 F F 7 6 F F F 2 5 T1 12 11 17 A 2 16 18 A F F G L 11 F G L 14 F Q 29 21 A 28 23 4 11 F 34 A T1 32 30 26 21 x2 F 31 A 31 Separate glide into two parts at first.(Page 4) N 22 16 Screw eccentric rod(A) into 17board 2 and 4 with a24 screwdriver as shown. 16 Fix slide rail(T1) to board 2 and 4 with screw(F) as shown.
2 F x 12 S1 x 4 A x 40 B x 40 1 C x 14 9 3 x 12 mm D x 38 10 10 Separate glide into two parts at first.(Page 4) 9 Fix slide rail(S1) to board 2 and 4 with screw(F) shown.
3 F x 18 S1 x 4 A x 40 T1 x 2 B x 40 9 3 x 12 mm 2 F 4 6 x 30GG F 3 x 12 mm C 3 x 10 mm 5180° Lx2 Kx8 F 16 F F G11 x2 16 17 15 F 4 x 12 mm F 14 F Qx2 18 15 T111 14 F F D T1 11 17 Px2 T1 18 3 11 F 6 x 12 mm F D 12 11 Nx2 H x 16 T1 3 F 4 x 35GG Gx4 6 T1 F D x 38 10 Fix slide rail(T1) to board 3 10 with screw(F) at first,flip the 9 board 180°,fix another (T1) 6 x 35 mm 15 x 10 mm as shown.
4 Cx6 Dx8 A x 40 B x 40 6 x 30 mm C x 14 D x 38 4 x 35 mm Insert wooden dowel(C) into board 7 at first,fix board 8 to board 7 with screw(D) as shown. C 6 x 35 mm Insert wooden dowel(C) into 15 x 10 mm 6 x 30GG board 3 at first,fix board 3 E x 40 F x 80 Gx4 to board 6 and 7 with C screw(D) as shown.
6 1 9 10 10 Insert back board 9 and 10 along grooves as shown. 4 10 7 8 6 93 6 8 10 2 3 5 9 5 12 11 17 16 18 11 17 15 14 18 15 15 x 10 mm 11 6 x 30 mm 14 Insert wooden dowel(C) into 13 board 2 at first. Attach board 2 to board 5, 6, 7 and 8, add cam lock(B) into board 5,6,7,8 and turn 29 21 as shown.
Cx5 Bx4 8 1 9 15 x 1015 mmx 6 x 35 mm 10 mm6 x 30 mm 6 x 30GG 10 4 x 35GG Insert woodenF dowel(C) into board 4 at first. Gx4 x 80 10 Attach board 4 to board 5, 6, 7 and 8, 9 into board 5,6,7,8 add cam lock(B) and turn clockwise to tighten C 7 as shown.
Px2 Nx2 10 1 9 15 x 10 mm4 x 40 mm 6 x 35 mm E x 32 6 x 30GG 10 10 F x 80 4 x 35GG Gx4 H x 16 4 9 1 3 x 15 mm 7 8 Wall 2 6 3 x 10 mm Jx1 3 x 12 mm Kx8 3 3 N 6 x 12 mm Lx8 Gx2 2 Install anti-tipping device as shown.
U x 16 11 1 9 3 x 25 mm 10 10 4 9 A x 40 B x 40 8 U 6 F x 80 3 x 10 mm 11 14 U13 U Px2 U U 21 25 27 27 26 23 22 16 11 17 12 mm U U 6 x 12 mm E E Gx2 14 23 11 21 U U 25 26 Qx2 U 23 4 x 12 mm U 28 31 21 35 U 22 U U 32 U 4 x 40GG Sx 4 H x 16 28 L15 x2 21 24 22 24 28 16 3 x Kx8 18 Nx2 18 12 26 15 18 25 11 24 17 4 x 35GG Gx4 5 3 x 16 mm11 16 27 26 UE x 402 U U 6 x 30GG 3 15 x 10 mm 27 D x 38 7 6 x 35 mm Jx1 C x 14 31 17 Tx8 16 sc
U x 16 12 3 x 2515 mm x 10 6 x 35 mm U x 32 mm 6 x 30GG 4 x 35GG Gx4 F x 80 H x 16 Embed board 33 and 34 to board 32. Fix board 31 to board 32 with screw(U) as shown. Fix board 29 and 30 to board 22, 33 and 31 with screw(U)as shown.
A x 30 13 1 9 6 x 35 mm 10 10 Screw eccentric rod(A) into board 11, 13, 19 and 20 with a screwdriver as shown. 4 9 7 8 6 3 11 x1 13 x1 2 11 5 19 12 x2 11 17 F x 24 14 16 18 3 x 12 mm F S2 18 25 24 x2 17 16 15 14 S2 x 8 18 15 11 14 F 23 F 27 S2 26 17 F 16 34 33 S2 F 21 32 30 31 Fix runner(S2) to board 18 and 17 respectively with screw(F) as shown.
F F F B x 20 15 1 9 15 x 1015 mm x 6 x 35 mm 10 mm 10 6 x 30GG 4 x 35GG Attach 18, 15 and 17 to board 19 10 Gx4 and 20 respectively, add cam H x 16 9lock(B) and turn clockwise to tighten as shown.
F x 12 17 1 9 3 x 12 mm 6 x 35 mm E x 32 T2 x 4 15 x 10 mm 10 6 x 30GG 4 x 35GG Fix runner(T2) to board 18G and x 4 17 F x 80 10 respectively with screw(F) as shown.
D x 10 19 1 9 4 x 35 15 mmx 6 x 35 mm 10 mm 6 x 30GG 10 4 x 35GG Insert board 10along grooves G x 4 as shown. F x 8014 Fix board 16 to 18, 15 and 17 with 9 shown.
21 6 x 35 mm E x 32 15 x 10 mm 6 x 30GG Gx4 F x 80 4 x 35GG H x S1 16 S2 3 x 15 mm Jx1 3 x 10 mm 3 x 12 mm Kx8 Lx8 20 20 6 x 12 mm Gx2 Slide drawers in. 19 19 Nx2 22 3 x 16 mm Qx2 Px2 4 x 12 mm Rx2 4 x 40GG T1 T2 11 13 20/23 Slide drawers in.
23 F F F Place glass board 1 to top as shown.
6 x 35 mm E x 32 3 x 15 mm Jx1 15 x 10 mm F x 80 3 x 10 mm Kx8 6 x 30GG Gx4 3 x 12 mm Lx8 3 x 16 mm Nx2 Px2 Qx2 4 x 40GG 22/23 4 x 35GG H x 16 6 x 12 mm Gx2 4 x 12 mm Rx2
6 x 35 mm E x 32 3 x 15 mm Jx1 15 x 10 mm F x 80 3 x 10 mm Kx8 6 x 30GG Gx4 3 x 12 mm Lx8 3 x 16 mm Nx2 Px2 Qx2 4 x 40GG 23/23 4 x 35GG H x 16 6 x 12 mm Gx2 4 x 12 mm Rx2