IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furniture should be assembled on a soft layer-could be a rug. PROVE EFFICIENCY ! to find a partner to install you, which can speed up installation efficiency and the time. Al ure tw , . attachment that fit your wall. If unsure, seek professional advice.
Children have died from furniture tipover. To reduce the risk of furniture popover: » ALWAYS install tip over restraint provided. « NEVER put a TV on this product, += NEVER allow children to stand climb or hang on drawers, doors, or shelves, « NEVER open more than one drawer at a time. *# Claps heaviest items in the lowest drawers. This is a permanent label.
Please prepare the following tools When installing, please carefully confirm whether a3 v <3 each screw corresponds to the manual, accessories ® with similar shapes can be distinguished by size [VEE] 5/23 $B PUFUKGAGA.
Ax Fax Pex3smm B3.5x12mm Gx2 Ce» Insert quick fit screw(A) into plate 2 and 3 with a screwdriver as shown. Fix part(G) to plate 2 and 3 with screw(F) as shown. Pismire Connect plate 2 and 3 with plate 5, put cam lock(B) into plate 5 and turn clockwise to tighten as shown.
©) Slide plate 4 along available grooves as shown. PEx50mm Pax40mm Insert long wooden dowel(D) into plate 2 and 3 at first, attach plate 6 and fix with screw(E) as shown.
& Fx2 Sxi P6x3I5mm $3.5xi2mm 0 Insert quick fit screw(A) into plate 1 with a screwdriver as shown. Fix part(S) to plate 1 with screw(F) as shown. ©) Slide plate 4 along available grooves as shown.
(7) Bx6 cx4 Plasma @8x30mm Insert wooden dowel(C) into plate 2 and 3 at first, cover plate 1. Put cam lock(B) into plate 2,3 and turn clockwise to tighten as shown.
Fr ZU pel Fix anti-tipping device(N) M to plate 1 with screw(M) N { as shown. Pex3smm | Insert quick fit screw(A) into plate 6 with a screwdriver as shown.
$3.5x12mm 350mm 350mm Fix slide rail(CL) and (CR) to plate 7 and 8 respectively with screw(F) as shown. BEX35mm Insert quick fit screw(A) into plate 7 and 8 with a screwdriver as shown.
g Plasma Attach plate 5, 10 and 11 to plate 8, put cam lock(B) into plate 5,10,11 and turn clockwise to tighten as shown. 13 Slide plate 9 along available grooves as shown.
g Plasma Attach plate 7 to plate 5, 10 and 11, put cam lock(B) into plate 5,10,11 and turn clockwise to tighten as shown. 15 Insert quick fit screw(A) into plate 12 with a screwdriver as shown.
Insert wooden dowel(C) into plate 12 at first, attach plate 12 to plate 7, 11 and 8. Put cam lock(B) into plate 7,11,8 and turn clockwise to tighten as shown. Bx4 & Plasma Cx2 = $8x30mm Slide plate 9 along available grooves as shown.
A Bxé Plasma 18 Connect the two component. 8 and turn clockwise to tighten as shown. We suggest more than two people Put cam lock(B) into plate 7, to assemble in this step.
Hx 12 3x8 Kx4 Maximize Maxima Lx2 Fix hinge(J) to plate 13 and 14 with screw(H) as shown. Fix handle(L) to plate 13 and 14 with screw(K) as shown.
Fe @maximize Attach door plate 13 to plate 2; door plate 14 to plate 3 by fixing hinge with screw(H) as shown.
2y Place clothing rod(T) in. Txl Fix plate 16 and 17 to plate 18 with screw(U) as shown.
23) & B x15 Kx6 Lx3 Ux3 5 —— P4x30mm ® $6x35mm PL4x8mm Maxima Fix plate 20 to plate 18 with screw(U) as shown. Insert quick fit screw(A) into plate 15. Slide plate 19 along grooves. ® Attach plate 15 to the drawer component, turn cam lock(B) in plate 16,20,17 clockwise to tighten as shown. Fix handle(L) with screw(K) as shown.
PX Qx32 wi j A B3x16mm Insert buckle(Q) into back slots, and fix with screw(P) as shown.
Fe More detailed hinge adjustment mode: 1) Rotate out the screws connected with the cabinet counterclockwise, adjust the gap between the overall door frame and the upper and lower, and then rotate the screws clockwise after adjusting; 2) Rotate the screws at the end of the hinge counterclockwise to adjust the gap between the whole door frame and the cabinet before and after the adjustment, and then rotate the screws clockwise (rotate out to the movable door frame, do not need to over-rotate out); 3) Counter
WARRANTY WARRANTY CLAIMS e There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. «Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: «If you have purchased and have simply changed your mind, follow the retailers instructions for returns. DEFECTIVE ITEMS oIf your item is defective in any way, i.e. it doesn’t work but you can't identify why, in the first instance, please call us. DAMAGED ITEMS «If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.