IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furniture should be assembled on a soft layer-could be a rug. PROVE EFFICIENCY ! to find a partner to install you, which can speed up installation efficiency and the time. Al ure tw , . attachment that fit your wall. If unsure, seek professional advice.
Children haves sled from furniture tpover. To reduce the risk of furniture tipster: = ALWAYS install tip over restraint provided. « NEVER put a TV on this product. « NEVER allow children to stand, climb [4 hang on drawers,doors,or shelves. « NEVER open more than one drawer at a time. + Place heaviest items in the lowest drawers, This is a permanent label.
Please prepare the following tools When installing, please carefully confirm whether 3 each screw corresponds to the manual, accessories ® with similar shapes can be distinguished by size 5/20 FUFURGAGA
Axa Fx4 Gx2 rr | > Pex3smm B3.5x12mm Insert quick fit screw(A) into plate 2 and 3 with a screwdriver as shown. Fix part(G) to plate 2 and 3 with screw(F) as shown. Pismire Connect plate 2 and 3 with plate 5, put cam lock(B) into plate 5 and turn clockwise to tighten as shown.
3 Slide plate 4 along available grooves as shown. (4) Dx4 Ex4 BBR50mm Andorran Insert long wooden dowel(D) into plate 2 and 3 at first, attach plate 6 and fix with screw(E) as shown.
Pex3smm Fx2 ¥ B3.5x12mm Sxl & Insert quick fit screw(A) into plate 1 with a screwdriver as shown. Fix part(S) to plate 1 with screw(F) as shown. Slide plate 4 along available grooves as shown.
7) Insert wooden dowel(C) into plate 2 and 3 at first, cover plate 1. Bx6 & Blammo Cx4 = @8x30mm Put cam lock(B) into plate 2,3 and turn clockwise to tighten as shown. @5x14mm Fix anti-tipping device(N) to plate 1 with screw(M) as shown.
pea P6u35mm Insert quick fit screw(A) into plate 6 with a screwdriver as shown. 10 & BExIZmm Insert quick fit screw(A) into plate 7 and 8 with a screwdriver as shown.
ay Bx4 Cad Plasma @8x30mm Insert wooden dowel(C) into plate 8 at first, attach plate 10 and 9. Put cam lock(B) into plate 10,9 and turn clockwise to tighten as shown. Slide plate 11 along available grooves as shown.
Bx4 Cx4 ®& = Proximal Pex3omm Insert wooden dowel(C) into plate 9 and 10 at first, cover plate 7. Put cam lock(B) into plate 10,9 and turn clockwise to tighten as shown. PEx3I5mm Insert quick fit screw(A) into plate 12 with a screwdriver as shown.
15 Bx4 & Plasma Cx2 = $8x30mm Insert wooden dowel(C) into plate 12 at first, attach plate 12 to plate 7, 10 and 8. Put cam lock(B) into plate 7,10,8 and turn clockwise to tighten as shown. BEXIZmm Fe 13/20 Slide plate 11 along available grooves as shown.
6 Kx8 M4xl8mm J x1ig Hx 20 Maximize 18 Fix hinge(J) to plate 13, 14, 15 and 16 with screw(H) as shown. Fix handle(L) with screw(K) as shown.
A Bx6 & Plasma ,8 and turn A Connect the two component. Put cam lock(B) into plate 7 clockwise to tighten as shown. We suggest more than two people to assemble in this step.
21) P x32 Qx32 B3x16mm Insert buckle(Q) into back slots, and fix with screw(P) as shown.
Fe More detailed hinge adjustment mode: 1) Rotate out the screws connected with the cabinet counterclockwise, adjust the gap between the overall door frame and the upper and lower, and then rotate the screws clockwise after adjusting; 2) Rotate the screws at the end of the hinge counterclockwise to adjust the gap between the whole door frame and the cabinet before and after the adjustment, and then rotate the screws clockwise (rotate out to the movable door frame, do not need to over-rotate out); 3) Counter
WARRANTY WARRANTY CLAIMS «There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. «Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: «If you have purchased and have simply changed your mind, follow the retailers instructions for returns. DEFECTIVE ITEMS oIf your item is defective in any way, i.e. it doesn’t work but you can't identify why, in the first instance, please call us. DAMAGED ITEMS «If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.