Display Cabinet Version:11/03/2022 1/26
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 44 B x 44 C x 52 D x 15 E x 90 4 x 14mm F x6 L x2 G x 12 H x 14 4x16 mm 4 x 30 mm Mx 2 2.
1 13 19 17 3 6 17 17 14 19 2 6 15 19 7 5 20 21 4 11 16 10 18 9 18 20 18 8 12 12 4/26
1 x1 2 x1 3 x1 4 x1 5 x1 6 x2 7 x1 8 x1 9 x1 10 x 1 11 x 1 12 x 2 13 x 1 14 x 1 15 x 1 16 x 1 17 x 3 18 x 3 19 x 3 20 x 2 21 x 1 5/26
Ax6 1 Insert quickfit screw(A) into corresponding holes in plate #8 with a screwdriver as shown. A A A A A 8 A A 8 2 Cx4 Bx6 Connect two plate #12 with plate #8 using wooden dowel(C), put cam lock(B) into plate #12 and turn clockwise to tighten as shown.
A x 10 3 Insert quickfit screw(A) into corresponding holes in plate #4 and #5 with a screwdriver as shown.
Cx2 4 Hx2 4 x 30 mm Connect plate #16 with plate #8 using wooden dowel(C) and then fix with screw(H) as shown. 16 C H 16 8 H H 5 8 Cx4 Bx5 Connect the component(assembled in step 4) with plate #5 using wooden dowel(C) at first. Put cam lock(B) into plate #8 and #12, turn clockwise to tighten as shown.
Bx5 6 Cx8 Connect plate #11 with plate #16 using wooden dowel(C) at first. 8 B 4 180° 180° 4 B 12 4 C C C 11 B C C C C C B 16 8 5 Connect plate #4 with the component using wooden dowel(C), put cam lock(B) into plate #8 and #12, turn clockwise to tighten as shown. 7 20 Connect two plate #20 with plank #21 at first. Slide plate #20 into available grooves as shown.
Mx2 8 2.5 x 10mm Fix back plate #20 with plate #16 using screw(M) as shown. M 20 5 M 20 M 20 Ax4 9 Insert quickfit screw(A) into corresponding holes in plate #6 as shown.
10 Hx2 Cx2 4 x 30 mm Connect plate #13 with plate #6 using wooden dowel(C) and then fix with screw(H) as shown. 13 C 6 H 13 6 H 11 H Bx2 Cx2 Connect plate #14 with plate #6 using wooden dowel(C), put cam lock(B) into plate #14, turn clockwise to tighten as shown.
Hx2 Cx2 12 4 x 30 mm Connect another plate #6 with plate #14 using wooden dowel(C) and then fix with screw(H) as shown. 6 13 14 6 C H H 14 6 H 13 Ax4 A A A 2 2 A A Insert quickfit screw(A) into corresponding holes in plate #2 as shown.
Ax4 14 A A A 3 A 3 A Insert quickfit screw(A) into corresponding holes in plate #3 as shown. Bx4 15 Cx4 2 180° 6 B Attach plate #2 to two plate #6 with wooden dowel(C), put cam lock(B) into plate #6 and turn clockwise to tighten as shown.
Cx4 Bx4 16 Slide plate #19 into available grooves at first. Attach plate #3 to two plate #6 with wooden dowel(C), put cam lock(B) into plate #6 and turn clockwise to tighten as shown. 6 6 B C B B C B 6 B 19 3 180° 3 Ax8 17 A A 1 A A 1 A A A Insert quickfit screw(A) into corresponding holes in plate #1 as shown.
18 Bx8 Cx6 C 1 C B B 1 C B 19 13 180° 3 B 3 14 2 Slide plate #19 into available grooves at first. Cover plate #1 to the top of the component with wooden dowel(C), put cam lock(B) into plate #2,#13,#3, and turn clockwise to tighten as shown.
Bx2 19 Cx2 2 15 Attach plate #15 to plate #6 with wooden dowel(C), put cam lock(B) into plate #15 and turn clockwise to tighten as shown. B B 6 C 15 3 B 180° 20 6 Ax8 A A 7 A A A A 7 A 16/26 A A Insert quickfit screw(A) into corresponding holes in plate #7 as shown.
Hx6 Cx6 21 4 x 30 mm Slide plate #19 into available grooves at first. Cover plate #7 to the bottom of the H component with wooden dowel(C), and fix using screw(H) as shown.
Jx2 22 Kx2 4 x 12mm Fix part(K) to plate #1 with screw(J) as shown.
Bx8 23 Cx6 I II III Connect the two components(assembled in step 8 and 22) with wooden dowel(C), put cam lock(B) into plate #4,#16,#5, and turn clockwise to tighten as shown. Requires more than two people to assemble.
N x 12 24 P x 12 3 x 16mm Reinforce back plate using part(P) with screw(N) as shown.
25 Qx8 Insert part(Q) into corresponding holes in plate #4,#16 and #5, then place plate #9 and #10 in as shown.
E x 30 D x 15 26 Fx6 G x 12 4 x 16 mm 4 x 14mm Fix hinge(D) to plate #17 and #18 using screw(E) as shown. E E E D D E 17 D E G G D 17 G F G 17 x3 F Fix handle(F) to plate #17 and #18 using screw(G) as shown.
27 E x 24 4 x 14mm Fix door plate door plate #18 to lower cabinet by fixing hinge with screw(E) as shown.
28 E x 36 4 x 14mm Fix door plate door plate #17 to upper cabinet by fixing hinge with screw(E) as shown.
29 If there is misalignment after you install, adjust the screw to the best condition 25/26
Hx2 30 Lx2 4 x 30 mm Drill holes on your wall, and install anti-tipping device as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
