Operating Manual

PrimAer 28GHz Operating Manual

Figure 32. DU Main Screen

① Tree List

This item is to check all equipments on the current configured system. Also, it can monitor real-time

on each unit's alarm status through each unit item alarm.

② GUI Connection

This is where the unit and PC can be connected. When pressing the arrow that checks ‘Comport’ and

clicking the 'Auto' button, the unit & PC connected comport will automatically be renewed, and when

pressing the 'CONNECT' button, the button status will change to 'DISCONNECT', allowing access to the

GUI.

③ Function List

This item is to use implemented additional functions. The 'History' function, temperature/power 'Table'

manage function, the firm ware download function, and the 'Debug' function can be used.

- History : Item to use ‘Alarm History’ function. Item to check connected unit's alarm history.

- Table : Item to create/manage output table and temperature table per each unit.

- Download : Item to download firmware per each unit.

- Debug : Item to check real-time debug messages from the CPU configured for each unit

④ DU System

This item is to check DU system information and alarm, the information list is as below.

- F/W Ver : MCU Firmware Version

- FPGA Ver : FPGA Firmware Version

- Cur Time : Current Time

- Rpt Type : Repeater Type

- Rpt Maker : Repeater Maker

- Temper : Current Temperature

- Temperature H : Temperature Upper Setting