Manual

USINGTHEOVEN
SETTINGOVEN
CONTROLS
SETTINGTHECLOCK
I CLOCK I
THE OVEN ON/OFF switch
MUST always be in the OVEN
ON position in order to program
the oven. The switch should only be
turned to the OVEN OFF position
when the oven will not be operated
for an extended period.
MINUTETIMER
I MINUTE
TIMER
Before using the oven, arrange the oven rack(s) according to
the food being cooked. See "Arranging Oven Racks" under
Oven Cooking.
The time of day clock operates even when the oven is not in
use. The automatic stop and start time operations work
directly with the time of day clock. See "Automatic Timed
Oven". Therefore, the clock must always be set to the correct
time of day.
To set the clock when the power supply to the oven is first
connected, or if the power supply to the oven is interrupted:
1. Be sure that the OVEN ON/OFF switch is in the OVEN
ON position.
2. The display window will flash. The oven control wiU lock
and then unlock the oven door. The word "LOCK" will
flash in the lower right comer of the display. The locking
and unlocking of the door takes about one minute. This is
a normal part of the initial start-up and does not mean that
the oven will begin a self-clean cycle.
3. Touch the CLOCK pad. The display window will stop
flashing. The word "TIME" will glow in the lower left
comer of the display.
4. Turn the SET knob in a clockwise direction until the cor-
rect time of day- appears in the display.
5. Touch the CANCEL pad.
To change the set time:
1. Touch the CLOCK pad. The word "TIME" will glow in
the lower left corner of the display.
2. Turn the SET knob in a clockwise direction until the cor-
rect time of day appears in the display.
3. Touch the CANCEL pad.
The minute timer does not start or stop cooking. It serves as
an extra timer in the kitchen that will beep when the set time
has run out. The minute timer can be used independently dur-
ing any of the oven functions. The timer can be set for any
amount of time from one second to nine hours and 50
minutes.
To set the timer:
1. Touch the MINUTE TIMER pad. ":00" will glow in the
display. The word "TIMER" will glow in the lower left
corner of the display.
2. Turn the SET knob in a clockwise direction until the
desired time appears in the display.