Owner Manual

31
Removing Auto CrispSeal Drawer
STORAGE FEATURES
Removing Auto Humidity
Control Membrane
Opening SnackZone
Recessed Snack Drawers
To remove the Auto CrispSeal drawer for
cleaning:
1. Pull the drawer out until it stops.
2. Lift the front slightly and remove the
drawer.
SnackZone - Recessed Snack Drawers
These drawers are ideal for storage of deli
meats and cheeses.
To open: slide back the cover to allow
access to the drawers.

NOTE
Frigidaire does not recommend replac-
ing the auto-humidity membrane unless
it becomes damaged or ruined. If the
membrane becomes soiled, it can be
washed with soap and water. Ensure
membrane is dry before replacing in
unit.
Frigidaire Professional Models
To remove the auto humidity control
membrane for cleaning:
1. Reach to back of humidity control
cover.
2. Place fingers between the humidity
control and the back wall, pull up on
cover.
3. Pull cover towards the front of
cabinet and remove.
4. Remove the humidity membrane
from the housing by lifting up sliding
over.
5. Clean humidity membrane with hot
soapy water.
6. Replace membrane in housing and
unit by reversing the steps above.