Use and Care

CAUTION
To avoid personal injury or property
damage, handle tempered glass shelves
carefully. Shelves may break suddenly if
nicked, scratched, or exposed to sudden
temperature change. Allow the glass shelves
to stabilize to room temperature before
cleaning. Do not wash in dishwasher.
29
STORAGE FEATURES

NOTE
Features may vary according to model.
You can easily adjust shelf positions in the
fresh food compartments to suit your needs.
The shelves have mounting brackets that
attach to slotted supports at the rear of each
compartment.
Change the Position of a Shelf
1 Remove all food from shelf.
2 Lift the front edge up and pull the shelf
out.
3 Replace by inserting the mounting bracket
hooks into the desired support slots.
4 Lower the shelf and lock into position.
IMPORTANT
Be aware of the air seal located at the rear of
the shelf. Shelves located on the left side should
have the air seal mounted on the far left side.
Shelves located on the right side should have
the air seal mounted on the far right side. This
is to ensure there is no interference with the
large air tower on the back wall of the cabinet.
This also applies to the crisper shelves.
Reposition the Air Seal
For crisper shelves:
1 Remove air seal by pushing down on the
ap with a downward rotation.
2 Position the air seal towards the outside
end of the shelf to avoid the air tower
when shelf is pushed back into place.
3 Install seal by sliding lower tab of seal up
into bottom rear slot of shelf with seal at a
downward angle then pulling up on seal ap
until seal sits snug on back of shelf and ap sits
at about a 10 degree angle from shelf surface.
For glass shelves:
1 Remove air seal by pushing seal straight back.
2 Position the air seal towards the outside
edge of the shelf to avoid the air tower
when shelf is pushed back into place.
3 Install seal by sliding the open channel end
of the seal onto back edge of shelf until seal
sits snug on back of shelf and ap sits at
about a 10 degree angle from shelf surface.
Flip Shelf