Installation Guide

4
8
7
Cabinet Front
Cabinet Bottom Shelf
Tighten the outer two screws to the top
of the microwave oven. (While tightening
screws, hold the microwave oven in place
against the wall and the top cabinet.)
Filler Block
Equivalent
to Depth
of Cabinet
Insert 2 self-aligning
screws through outer
top cabinet holes. Turn
two full turns on each
screw.
Installation Instructions
ADJUST THE
E
XHAUST ADAPTOR
Open the top cabinet and adjust the exhaust
adaptor to connect to the house duct.
Back of
Microwave
For Front-to-Back or
Side-to-Side Adjustment,
Slide the Exhaust
Adaptor
as Needed
Blower Plate
Damper
Recess
Self-Aligning Screw
Microwave Oven Top
Attach the microwave oven to the top
cabinet.
5
MOUNT THE
MICROWAVE OVEN
(cont.)
CONNECTING DUCTWORK
1
2
Extend the house duct down to connect to
the exhaust adaptor.
Seal exhaust duct joints using furnance duct
tape
for high temperature applications.
House Duct
Tighten center
screw
completely.
6
C5.
C6.
C7.
Install grease
filters. See the Use &
and Care packed with the microwave.
EN-23