Installation Instructions

8
36” INDUCTION RANGE INSTALLATION INSTRUCTIONS
• The anti-tip device must be installed, and the elec-
trical connection should be made before the range
is placed in its final position.
• Legs should be installed near to where the appli-
ance will be used as they are not secure for long
transit. Keep the unit raised so that the legs can
be screwed into their couplings, then lower the
range gently to prevent the legs and mounting
hardware from being subject to any undue strain.
The following is the correct order of installation and
positioning:
1. Install and adjust the legs.
2. Assemble and fix the anti-tip bracket to the floor
or wall.
3. Connect the plug to the grounded outlet.
4. Move the range to its final position.
The adjustment range of the screw is 2 inches
(50.8 mm).
The appliance must sit level on the floor to ensure
stability:
• Screw or unscrew the bottom part of the foot until
the appliance is stable and level on the floor.
Electrical connection
NOTE: First insert the front feet and then the rear
ones.
NOTE: this appliance must only use the specific
leveling legs provided by the manufacturer.
WARNING
Electrical shock hazard
• This appliance is equipped
with a four-prong grounding
plug for your protection
against electric shock and
should be plugged directly
into a properly grounded
receptacle. Do not cut or
remove the grounding prong
from this plug.
• The grounding prong must
be plugged into a matching
grounding type receptacle
and connected to a correctly
polarized 240-Volt circuit. If
there is any doubt as to
whether the wall receptacle
is properly grounded, have it
checked by a qualified elec-
trician.
Failure to do any of the above
could result in a fire, personal
injury or electrical shock.