Use and Care Manual
Table Of Contents
- Introduction
- Important Safety information
- Features (2-Door Model)
- Features (3-Door Model)
- Installation
- Door Removal
- Door Handle Installation (some models)
- Water Supply Connection
- Controls and Settings
- Automatic Water Dispenser
- Ice Maker
- Storage Features
- Storing Food and Saving Energy
- Normal Operating Sounds
- Filter Replacement
- Care and Cleaning
- Troubleshooting
- Limited Warranty
9
3. Ensure both doors are bind-free with
their seals touching the cabinet on all
4 sides and the cabinet is stable.
Flipper Mullion (some models)
Adjust the flipper mullion for proper
connection with the mullion guide by
ensuring the flipper mullion is folded and
perpendicular to the fresh food door. If
the mullion guide is not in the correct
position, it could prevent the door from
closing completely.
WRONG
INSTALLATION
You can meet most of these conditions
by raising or lowering the adjustable
anti-tip legs.
To level the cabinet using the anti-tip legs:
1. Slightly open freezer drawer.
2. Lower anti-tip legs until they are
both touching the floor.
To raise unit: turn leg clockwise.
To lower unit: turn
leg counterclockwise.
Cabinet Leveling and Door
Alignment (if necessary)
Guidelines for final positioning of appliance:
• All 4 corners of the cabinet must rest
firmly on the floor.
• The front should be slightly
elevated to ensure the doors close
and seal properly.
• Doors should align with each other
and be level.