Owners Guide

4
FEATURES AT A GLANCE
Features may vary according to model
Heating Element
Glass Trap
Detergent
Dispenser
Overfi ll Protector
Silverware Basket
Lower Rack
Serial Label
(Located on Right)
Top Rack
Nozzle or Spray Arm
(located inside the unit)
Cup Shelves
Middle Spray Arm
Lower Spray Arm
Rinse Aid
Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms
against soiled surfaces. First, the dishwasher lls with water covering the fi lter area. Water is
then pumped through the spray arms. Soil particles go across the lter and down the drain as the
water is pumped out. This series of steps are repeated as needed. The number of water lls vary
with the cycle being used.
Bowl Tines
Wash Cycle Selections
Cycle times are approximate and will vary with
options selected. Hot water is necessary to
activate dishwasher detergent and melt fatty
food soils. An automatic sensor will check the
incoming water temperature and, if it is not
hot enough, the cycle will be lengthened for
automatic water heating in the main wash and
nal rinse of all cycles. This happens even
when HI-TEMP WASH option has not been
selected. When HI-TEMP WASH is selected,
an even higher temperature will be reached to
handle heavier soil loads.
OPERATING INSTRUCTIONS
Option Selections (available on
select Models)
Hi-Temp Wash Option
When HI-TEMP WASH option is selected, the
dishwasher heats water in the main wash to
approximately 140
o
F (60
o
C).
This increase in water temperature helps the
dishwasher detergent remove food grease
and soil from dishes more effectively and aids
in drying. HI-TEMP WASH option is available
on POWER PLUS, NORMAL WASH and TOP
RACK cycles. HI-TEMP WASH is automatically
provided when the POWER PLUS cycle is
selected.
When HI-TEMP WASH option is selected, the
indicator light will come on and remain on until
end of cycle. To turn off the HI-TEMP WASH
option, press HI-TEMP WASH a second time.
The indicator light will turn off.
NOTE
Lights on the console will remain on once
the door is shut and wash cycle begins. If it
is preferred to have the lights turn off while
cycle is running see Console Lights section
for instructions.
ë